Fiber Optics Temperature Measurement by OMEGA
ثبت نشده
چکیده
A typical optical fiber is usually constructed of a silicon (glass) material, however, plastic and quartz are also available but normally for data transmission. Today most of all optical fibers manufactured consist of a lightconducting glass core surrounded by a thin layer of glass cladding with a lower refractive index. This cladding serves to protect the core finish. All fibers used in infrared instrumentation are made of glasses especially chosen for their ability to transmit the radiation comprised in the chosen spectral region.
منابع مشابه
Investigation of the Effect of Electron Beam Different Doses on Optical Dissipation in Fiber Optic
Measurement of ionizing radiation in various fields, such as environmental safety, industrial detection processes, radiation protection and medical is very important. Radiation dosimetry plays an important role in determining the amount of energy absorbed and the effects of radiation. Recent optical fiber sensors have been shown to be radiation dosimeters. Our goal here is to investigate the ef...
متن کاملDual temperature and strain measurement with the combined fluorescence lifetime and Bragg wavelength shift approach in doped optical fiber.
We have constructed fiber-optic sensors to measure temperature and strain by combining the properties of fiber Bragg gratings with the fluorescent lifetimes of various doped fibers. Sensors have been made with the fiber Bragg grating written directly into the doped fiber to ensure the collocation of the strain and temperature measurement points. Results are compared with those obtained previous...
متن کاملFiber Bragg Grating Based Fiber-optic Temperature Measurement System for the High Voltage Cable
The Fiber Bragg Grating (FBG) sensor is used to detect the temperature of the high voltage cable. The temperature measurement system is constructed and the functions of each part of the system is stated in detail. This temperature measurement systems presented in this paper is usefull for the operation of the power cable.
متن کاملSimultaneous measurement of strain and temperature by use of a single-fiber Bragg grating and an erbium-doped fiber amplifier.
We propose and demonstrate a novel sensor by using a single-fiber Bragg grating that can simultaneously measure strain and temperature with the aid of an erbium-doped fiber amplifier. By using a linear variation in the amplified spontaneous emission power of the erbium-doped fiber amplifier with temperature, we determine the temperature. By subtracting the temperature effect from the fiber Brag...
متن کاملMeasuring temperature profiles in high-power optical fiber components.
We demonstrate a new method for measuring changes in temperature distribution caused by coupling a high-power laser beam into an optical fiber and by splicing two fibers. The measurement technique is based on interrogating a fiber Bragg grating by using low-coherence spectral interferometry. A large temperature change is found owing to coupling of a high-power laser into a multimode fiber and t...
متن کامل