Stress intensity factors for a crack in front of an inclusion
نویسنده
چکیده
A stable numerical algorithm is presented for an elastostatic problem involving a crack close to and in front of an inclusion interface. The algorithm is adaptive and based on an integral equation of Fredholm’s second kind. This enables accurate analysis also of rather difficult situations. Comparison with stress intensity factors of cracks close to straight infinite bimaterial interfaces are made.
منابع مشابه
Three-Dimensional Finite Element Analysis of Stress Intensity Factors in a Spherical Pressure Vessel with Functionally Graded Coating
This research pertains to the three-dimensional (3D) finite element analysis (FEA) of the stress intensity factors (SIFs) along the crack front in a spherical pressure vessel coated with functionally graded material (FGM). The vessel is subjected to internal pressure and thermal gradient. The exponential function is adopted for property of FGMs. SIFs are obtained for a wide variety of crack sha...
متن کاملInfluence of an Inclusion on Multi-Pass Copper Shaped-Wire Drawing by 2D Finite Element Analysis
The size and length effects of an inclusion on multi-pass copper shaped-wire drawing were investigated. For this purpose, an experimental investigation on optimal die half-angle was conducted. Based on experimental data of optimal die half-angle, wire and inclusion deformations, drawing and hydrostatic stress of copper shaped-wires that contain an inclusion were calculated by two-dimensional fi...
متن کاملA two dimensional Simulation of crack propagation using Adaptive Finite Element Analysis
Finite element method (FEM) is one of the most famous methods which has many applications in varies studies such as the study of crack propagation in engineering structures. However, unless extremely fine meshes are employed, problem arises in accurately modelling the singular stress field in the singular element area around the crack tip. In the present study, the crack growth simulation has b...
متن کاملSTRESS INTENSITY FACTORS FOR AN INTERIOR GRIFFITH CRACK OPENED BY HEATED WEDGE IN A STRIP WHOSE EDGES ARE NORMAL TO CRACK AXIS
After second world war, we have seen a very rapid development of Thermoelasticity stimulated by various engineering sciences. As we know, structures behave in different fashion under climate variation and the most responsible factor for these variations is heat which falls through and causes deformation of the body. A considerable progress in the field of aircraft and machine structures, mainly...
متن کاملEstimation of Fracture path in the Structures and the Influences of Non-singular term on crack propagation
In the present research, a fully Automatic crack propagation as one of the most complicated issues in fracture mechanics is studied whether there is an inclusion or no inclusion in the structures. In this study The Extended Finite Element Method (XFEM) is utilized because of several drawbacks in standard finite element method in crack propagation modeling. Estimated Crack paths are obtained by ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2007