Pore Water Extraction for Unsaturated Zone Isotope Research: An Investigation using an Immiscible Displacement Fluid and a Centrifuge
نویسندگان
چکیده
منابع مشابه
Applying zoning method for numerical modeling of two immiscible fluid interface motion in an underwater tank using BEM
In this study, boundary element method was used to model sea wave propagation on a hemisphere shape under water tank and oil-water common surface oscillation in the tank. Also, kinematic and dynamic oundary conditions of free surface and common surface of oil and water were discritized by Finite difference method. There were some singularities in BEM method, which were removed by applying zonin...
متن کاملCARBON DIOXIDE MINIMUM MISCIBILITY PRESSURE ESTIMATION (CASE STUDY)
Carbon dioxide flooding is considered to be one of the most effective enhanced oil recovery methods for the light oil reservoirs. Depending on the operating pressure, the process might be miscible or immiscible. Minimum miscibility pressure (MMP) is the most important parameter for assessing the applicability of any miscible gas flood for an oil reservoir. The miscibility condition is determine...
متن کاملA Multi-scale Approach to Model Two-phase Flow in Heterogeneous Porous Media
The immiscible displacement of a wetting fluid by a non-wetting one in heterogeneous porous media is modeled by using a multi-scale network-type analysis: (1) The pressure-controlled immiscible displacement of water by oil in pore-and-throat networks (length scale~1mm) is controlled by capillary forces. (2) The pressure-controlled immiscible displacement in uncorrelated or spatially correlated ...
متن کاملVzj50063 641..648
The objective of this study was to examine the pore-scale distribution and morphology of organic immiscible liquid in natural porous media containing three immiscible fluids. High-resolution, threedimensional images of an organic liquid (tetrachloroethene) in both three-phase (water–air–organic liquid) and two-phase (water–organic liquid) systems were obtained using synchrotron X-ray microtomog...
متن کاملCentrifuge modeling of one-step outflow tests for unsaturated parameter estimations
Centrifuge modeling of one-step outflow tests were carried out using a 2-m radius geotechnical centrifuge, and the cumulative outflow and transient pore water pressure were measured during the tests at multiple gravity levels. Based on the scaling laws of centrifuge modeling, the measurements generally showed reasonable agreement with prototype data calculated from forward simulations with inpu...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2016