Low-voltage Analog CMOS Filter Design
نویسندگان
چکیده
Design techniques for low-voltage analog TUters In CMOS technologies are discussed. The use of OTA-C implementation techniques towards low power supply voltages (3 V and below) requires special source degeneration and input signal folding techniques. Firstly, design techniques to achieve Pull CMOS continuous-time filters with low distortlon (Total harmonic distortion c -50 dB) and low power supply voltages (3 V) are discussed. The use of switched-capacitor techniques at extremely low voltages (1.5 V) requjre extra care for the switches in the circuit. Special design techniques, such as voltage multlpliers for the clock drivers and single transistor switches, are analyzed to achieve the low power supply speciflcatlons.
منابع مشابه
A Very Low Voltage 9th Order Linear Phase Baseband Switched Capacitor Filter (RESEARCH NOTE)
A very low voltage 9th order linear phase baseband switched capacitor (SC) filter has been designed to be used as part of a cellular GSM (Global System Mobile) receiver. A Gaussian-to-6dB filter of the order of seven is chosen and a second order function is added to reduce the group delay variations around. The filter uses a fully differential topology to increase the dynamic range and reduce t...
متن کاملHigh-Accurate Low-Voltage Analog CMOS Current Divider Modify by Neural Network and TLBO Algorithm
A high accurate and low-voltage analog CMOS current divider which operates with a single power supply voltage is designed in 0.18µm CMOS standard technology. The proposed divider uses a differential amplifier and transistor in triode region in order to perform the division. The proposed divider is modeled with neural network while TLBO algorithm is used to optimize it. The proposed optimiza...
متن کاملHigh-Accurate Low-Voltage Analog CMOS Current Divider Modify by Neural Network and TLBO Algorithm
A high accurate and low-voltage analog CMOS current divider which operates with a single power supply voltage is designed in 0.18µm CMOS standard technology. The proposed divider uses a differential amplifier and transistor in triode region in order to perform the division. The proposed divider is modeled with neural network while TLBO algorithm is used to optimize it. The proposed optimiza...
متن کاملA New Approach for Low Voltage CMOS based on Current-controlled Conveyors
Abstract In his paper a new current-controlled conveyor (CCCII) in CMOS technology is presented. It features, low supply voltage (±0.7), low power consumption, low circuit complexity, rail to rail operation and wide range parasitic resistance ( ). The circuit has been successfully employed in a multifunction biquad filter. Simulation results by HSPICE show high performance of the circuit and c...
متن کاملA New Trans-admittance-Mode Biquad Filter Suitable for Low Voltage Operation
The trans-admittance-mode (TAM) might act as a transforming bridge for voltage-mode to current-mode conversion. In this study a new low voltage operated electronically tunable TAM biquad filter structure realizing all the seven standard filtering functions namely; low-pass (LP), band-pass (BP), high-pass (HP), regular-notch (RN), low-pass-notch (LPN), high-pass-notch (HPN) and all-pass (AP) fro...
متن کامل