Novel Ceramic Membrane for High Temperature Carbon Dioxide Separation
نویسندگان
چکیده
منابع مشابه
An asymmetric tubular ceramic-carbonate dual phase membrane for high temperature CO2 separation.
For the first time, a tubular asymmetric ceramic-carbonate dual phase membrane was prepared by a centrifugal casting technique and used for high temperature CO2 separation. This membrane shows high CO2 permeation flux and permeance.
متن کاملSynthesis of a Multilayer Ceramic Membrane Used for Hydrogen Separation at High Temperature
A multilayer composite ceramic membrane was prepared by depositing a nano-scale layer of SiO2 on top of a modified porous alumina support by chemical vapor deposition (CVD) method. The modification of the support was carried out by adding a graded layer of Al2O3 (γ-alumina phase), using sol-gel method. An optimized temperature of 700 K for intermediate layer calcination was gained by XRD analys...
متن کاملPebax-Modified Cellulose Acetate Membrane for CO2/N2 Separation
Carbon dioxide (CO2) release from the exhaust gas streams of power plants that burn fossil fuels contributes the most emission of this gas, which includes more than half of the greenhouse effects. Thus, the separation of CO2 from exhaust gases is one of the main environmental concerns. Membrane technology, due to many advantages, has attracted many research attentions among the various gas sepa...
متن کاملFabrication and Characterization of Polyetherimide Hollow Fiber Membrane Contactor for Carbon Dioxide Stripping from Monoethanolamine Solution
In this research, process asymmetric polyetherimide hollow fiber membranes using ethanol (0, 2 and 4 wt%) as non-solvent additive in the polymer dope via phase inversion method were fabricated. Aqueous solution of 1-methyl-2-pyrrolidine (NMP) (90%) was applied as a bore fluid to avoid inner skin layer formation and water was used as the external coagulant. The morphology of fabricated membranes...
متن کاملPreparation of BaCe0.9Yb0.1O3-δ asymmetrical membrane for hydrogen separation at high tempratures
A mixed proton–electron conducting perovskite was synthesized by liquid-citrate method and the corresponding membrane was prepared by pressing followed by sintering. The hydrogen permeability of BaCe0.9Yb0.1O3-δ was studied as a function of temperature and hydrogen partial pressure (PH2) gradient. Using 100% dry hydrogen at 1173 K, the hydrogen permeation rate of dense membranes (1.63 mm thick)...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2001