Abrasive Waterjet Peening with Elastic Prestress: Effect of Boundary Conditions

نویسنده

  • BALAJI SADASIVAM
چکیده

Abrasive Waterjet Peening (AWJP) has emerged as a potential surface treatment process for metal implants and prosthetic devices. An elastic tensile prestress has been shown to increase the magnitude and depth of residual stress that can be obtained. In the present investigation, the subsurface residual stress fields resulting from AWJ peening of Ti6Al4V with load control and displacement control elastic prestress were compared. Prestress ranged from 0 to 75% of the material’s yield strength and the subsurface residual stress distribution was quantified using the layer removal technique. Results showed that the surface residual stress was dependent on the boundary conditions for prestress levels less than 60% of the materials yield strength. The magnitude of surface residual stress and the stored elastic energy were up to 50% and 100% larger respectively when load controlled boundary conditions were used. However, the boundary condition did not affect the depth of compressive residual stress.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Abrasive Waterjet Peening with Elastic Prestress: Subsurface Residual Stress Distribution

Recent advances in abrasive waterjet (AWJ) technology have resulted in new processes for surface treatment that are capable of introducing compressive residual stresses with simultaneous changes in the surface texture. While the surface residual stress resulting from AWJ peening has been examined, the subsurface residual stress field resulting from this process has not been evaluated. In the pr...

متن کامل

Abrasive waterjet peening: a new method of surface preparation for metal orthopedic implants.

Abrasive waterjet (AWJ) peening is a new mechanical surface treatment process envisioned for use on metal orthopedic implants. The process utilizes an abrasive waterjet to simultaneously texture and work harden the surface of a metal substrate through controlled hydrodynamic erosion. In this study, a titanium alloy (Ti6Al4V) was subjected to AWJ peening over a range of parametric conditions. Th...

متن کامل

مدل‌سازی اجزای محدود برش ماده فولادی با جت آب دارای ذرات برنده

Numerical modeling of machining processes is of significance in the parametric analysis and optimization of their performance. In this paper, a finite element-based model of abrasive waterjet (AWJ) cutting of a ductile material is presented with the help of an explicit, nonlinear finite element method. In this model, both solid-solid interaction and fluid-structure interaction are considered. T...

متن کامل

Experimentation on Piercing with Abrasive Waterjet

Abrasive waterjet cutting (AWJ) is a highly efficient method for cutting almost any type of material. When holes shall be cut the waterjet first needs to pierce the material.This paper presents a vast experimental analysis of piercing parameters effect on piercing time. Results from experimentation on feed rates, work piece thicknesses, abrasive flow rates, standoff distances and water pressure...

متن کامل

Surface Texture in Abrasive Waterjet Cutting

When cutting thick material with an abrasive wateriet, the surface area can be characterized by two texture types. At the top of the cut, the surface texture is smooth. At the bottom, the slurry jet exiting the workpiece forms large striations in the surface. An investigation was conducted to experimentafly determine the influence of the abrasive waterjet cutting parameters on surface texture. ...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2008