Detection of Tool Flute Breakage in End Milling Using Feed-Motor Current Signatures
نویسنده
چکیده
In this paper, an effective algorithm based on improved time-domain averaging is proposed to detect tool flute breakage during end milling using feed-motor current signatures. The algorithm proposed is demonstrated to be effective in detecting tool flute breakage in real time through a series of milling experiments, and is also demonstrated to be insensitive to the effects for transients, such as cutter runout, entry/exit cuts, and noise in the feed-motor current signals. Results indicated that the approach showed excellent potential for practical, on-line application for tool flute breakage detection during end milling.
منابع مشابه
A Fast Haar Transform and Concurrent Learning - based Monitoring Approach and Its Application to Tool Breakage Detection
This paper describes an effective monitoring approach for manufacturing processing by combining the recursive in-place growing FIR-median hybrid (RIPG-FMH) filters, the in-place fast Haar transform (IP_FHT) and the concurrent learning (CL). Meanwhile, the approach is applied to detect tool flute breakage during end milling by analyzing the feedmotor current signatures. RIPG_FMH can preserve the...
متن کاملIn Press
Real time tool condition monitoring has great significance in modern manufacturing processes. In order to prevent possible damages to the workpiece or the machine tool, reliable monitoring techniques are required to provide fast response to the unexpected tool failure. Milling is one of the most fundamental machining operations. During the milling process, the current of feed motor is weakly re...
متن کاملOn-line detection of the breakage of small diameter drills using current signature wavelet transform
This paper presents on-line tool breakage detection of small diameter drills by monitoring the AC servo motor current. The continuous wavelet transform was used to decompose the spindle AC servo motor current signal and the discrete wavelet transform was used to decompose the feed AC servo motor current signal in time–frequency domain. The tool breakage features were extracted from the decompos...
متن کاملCutting Force Prediction in End Milling Process of AISI 304 Steel Using Solid Carbide Tools
In the present study, an attempt has been made to experimentally investigate the effects of cutting parameters on cutting force in end milling of AISI 304 steel with solid carbide tools. Experiments were conducted based on four factors and five level central composite rotatable design. Mathematical model has been developed to predict the cutting forces in terms of cutting parameters such as he...
متن کاملPrediction of Chatter in CNC Machining based on Dynamic Cutting Force for Ball End Milling
This paper presents the suitable depth of cut, spindle speed and feed rate that will be chosen during machining. If thus parameters are not considered, this can provoke abnormal tool behavior such as chatter. Chatter will limit the tool life which only can be use for just a few times. To predict the chatter occurs, the parameters will be use are spindle speed, depth of cut and feed rate. CNC ma...
متن کامل