High Dynamic Range Imaging Using a Deformable Mirror for Space Coronography

The need for high dynamic range imaging is crucial in many astronomical elds, such as extra-solar planet direct detection, extra-galactic science and circumstellar imaging. Using a high quality coronograph, dynamic ranges of up to 10 5 have been achieved. However the ultimate limitations of coronographs do not come from their optical performances, but from scattering due to imperfections in the optical surfaces of the collecting system. We propose to use a deformable mirror to correct these imperfections and decrease the scattering level in local regions called \dark holes". Using this technique will enable imaging of elds with dynamic ranges exceeding 10 8. We show that the dark-hole algorithm results in a lower scattering level than simply minimizing the RMS gure error (maximum-strehl-ratio algorithm). The achievable scattering level inside the dark-hole region will depend on the number of mirror actuators, the surface quality of the telescope, the single-actuator innuence function and the observing wavelength. We have simulated cases with a 37 37 deformable mirror using data from the Hubble Space Telescope optics without spherical aberrations and have demonstrated dark holes with rectangular and annular shapes. We also present a preliminary concept of a monolithic, fully integrated, high density deformable mirror which can be used for this type of space application.