The nature of the frictional force at the macro-, micro-, and nano-scales

نویسنده

  • Esteban BROITMAN
چکیده

Nowadays it is accepted that the friction force is a combined effect arising from various phenomena: adhesive forces, capillary forces, contact elasticity, topography, surface chemistry, and generation of a third body, etc. Any of them can dominate depending on the experimental force and length scales of the study. Typical forces in macro-tribology are in the Newtons, while are reduced to milli-/micro-Newtons, and nano-Newtons in microand nano-tribology, respectively. In this paper, experimental friction results from fullerene like CNx films and single-crystal Si at the three scales will be discussed. The complex and broad variety of processes and phenomena connected with the dry friction coefficient at the macro-, micro-, and nano-scale point of view will be highlighted.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Simulation of Micro-Channel and Micro-Orifice Flow Using Lattice Boltzmann Method with Langmuir Slip Model

Because of its kinetic nature and computational advantages, the Lattice Boltzmann method (LBM) has been well accepted as a useful tool to simulate micro-scale flows. The slip boundary model plays a crucial role in the accuracy of solutions for micro-channel flow simulations. The most used slip boundary condition is the Maxwell slip model. The results of Maxwell slip model are affected by the ac...

متن کامل

A Macro-model for Nonlinear Analysis of 3D Reinforced Concrete Shear Walls

Architectural limitations in many situations make it necessary for the RC shear walls to be extended in plan in different directions at a single location that makes them a 3D configuration. Analysis of such walls is very challenging. In this research about 450 cases of 3D shear walls are considered with different shapes and heights. L, T and H-shape walls are studied. They are nonlinearly analy...

متن کامل

Design and performance analysis of a seismic grade resonance nano accelerometer

In this paper, design and performance analysis of a resonance nanosensor for earthquake low frequency geoacoustic waves detection is proposed. The model comprises of a proof mass suspended to the substrate, and a nanobeam attached to the intersection of the proof mass to the substrate. The nanobeam could be cosidered as a clamped-clamped nanoresonator actuated electrostartically. The induced ac...

متن کامل

Nanoscience and Nano Engineering in Concrete Advances , A Review

   This paper reviews some progressive studies and innovations in cement and concrete materials in nano field. Due to the widespread acceptance of the special properties of nano materials and using them for engineering concrete performance, understanding and directing their properties are not achievable without instructing concepts and investigating interactions among components. Due to ach...

متن کامل

Phase transition of the dry friction between crystalline surfaces induced by normal load

A major source of energy dissipation and surface wear is the kinetic friction at the interfaces of sliding bodies. Traditionally, on a macroscopic scale, this undesirable effect is reduced with lubricating the surfaces by introducing oil into their interface. An interesting phenomenon, called superlubricity, has been reported on a nanometer scale where dry (without lubricant oil) fruition and w...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2014