The Electromagnetic Interference Model Analysis of the Power Switching Devices
نویسنده
چکیده
The switching device turn-on and turn-off process will produce high-frequency electromagnetic interference, based on the finite element method ANSYS software with powerful computing capabilities, has been widely used in complex electromagnetic field calculations. In this paper, ANSYS software to model and analyze the insulated gate bipolar transistor (IGBT) and quantitative distribution of electromagnetic interference (EMI), and for the staff and scientists doing research in electromagnetic field analysis provides an effective reference program.
منابع مشابه
Electromagnetic Interference Generated from Fast Switching Power Electronic Devices
This paper investigates the negative effects of electromagnetic interference (EMI) due to fast switching power devices (high dv/dt and di/dt) used in power electronic converters and industrial equipment. Mitigation techniques have been explored to reduce EMI noise effectively. Remedial measures to reduce the risk of equipment malfunction and health risk due to EMI have been explored. In this pa...
متن کاملMitigation of Switching Harmonics in Shunt Active Power Filter Based on Variable Structure Control Approach
This paper presents a novel control approach used in shunt active power filter based on variable structure control combined with Random PWM technique (RVSC) that provides robust, fast, and more favorable performance for active power filter. This control strategy is compared with two other strategies to show the effectiveness of the introduced methods; pulse width modulated proportional-integral...
متن کاملEstimation of New Weighted Controlled Switching Overvoltage by RBFN Model
Mitigating switching overvoltages (SOVs) and conducting well-suited insulation coordination for handling stresses are very important in UHV transmission Lines. The best strategy in the absence of arresters is controlled switching (CS). Although elaborate works on electromagnetic transients are considered in the process of designing transmission systems, such works are not prevalent in day-to-da...
متن کاملAnalysis and Simulation of ZVS Methods in Full Bridge Converters and Realization of a 3 KW Prototype
One of the difficulties with PWM switching converters is high switching loss and electromagnetic interference due to switching at non-zero voltage and current, which limits the operating frequency. In order to reduce the converter volume and weight (by increasing the frequency) and reducing switching losses, zero voltage and current switching methods are recommended. In this paper, four main ze...
متن کاملAnalysis and Simulation of ZVS Methods in Full Bridge Converters and Realization of a 3 KW Prototype
One of the difficulties with PWM switching converters is high switching loss and electromagnetic interference due to switching at non-zero voltage and current, which limits the operating frequency. In order to reduce the converter volume and weight (by increasing the frequency) and reducing switching losses, zero voltage and current switching methods are recommended. In this paper, four main ze...
متن کامل