Nano Technology: A Microscopic Solution

نویسندگان

  • Govind Singh Tanwar
  • Ganesh Singh
  • Ravi Saharan
  • Eric Drexler
چکیده

The essence of nanotechnology is the ability to work at the molecular level, atom by atom, to create large structures with fundamentally new molecular organization. Nanotechnology is concerned with materials and systems whose structures and components exhibit novel and significantly improved properties. These physical, chemical, and biological properties, processes and phenomena are novel due to their nanoscale size in the range of about 10-9 to 10-7 m (1,000 times smaller than the diameter of human hair). The aim is to exploit these properties by gaining control of structures and devices at atomic, molecular, and supra-molecular levels and to learn to efficiently manufacture and use these devices. New behavior at the nanoscale is not necessarily as predictable as observed at large size scales. The most important changes in behavior are caused not by the order of magnitude size reduction, but by newly observed phenomena intrinsic to the nanoscale, such as size confinement, predominance of interfacial phenomena and quantum mechanics.

برای دانلود رایگان متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Postharvest Life of Cut Gerbera (Gerbera jamesonii) as Affected by Nano-silver Particles and Calcium Chloride

The purpose of this study was to evaluate the effects of Nano-silver (NS), calcium chloride (CaCl2) and their combinations on Gerbera jamesonii ‘Carambole’ cut flowers. The experiment was conducted as a completely randomized design (CRD) with 10 treatments and four replications, with three flowers in each replication. Treatments consisted of 5 mg L-1 NS, 1% and 2% CaCl2, 5 mg L-1 NS+ 1% CaCl2, ...

متن کامل

Effect of nano-Al2O3 particles concentration on microstructure and corrosion behavior of Co-P-nano-Al2O3 composite coating

Composite coatings containing P and ceramic particles are considered in terms of properties such as corrosion resistance, oxidation resistance and high hardness. In this study, Co-P-nanoAl2O3 composite coating was fabricated on the AISI 430 stainless steel substrate using a direct current electric deposition technique. The quality of the coating and its corrosion resistance were studied by chan...

متن کامل

Vibration analysis of a Timoshenko non-uniform nanobeam based on nonlocal theory: An analytical solution

In this article free vibration of a Timoshenko nanobeam with variable cross-section is investigated using nonlocal elasticity theory within the scope of continuum mechanics. Small scale effects are modelled after Eringen’s nonlocal elasticity theory while the non-uniformity is presented by exponentially varying width through the beam length with constant thickness. Analytical solution is achiev...

متن کامل

One Step Rapid Synthesis of Nano-Crystalline ZnO by Microwave-Assisted Solution Combustion Method

In this study nano-crystalline ZnO particles were synthesized by microwave-assisted solution combustion method. Zinc nitrate and urea were used as oxidizer and fuel, respectively. The effect of fuel to oxidizer (F/O) ratio on ZnO powder properties was investigated by using different urea/nitrate ratios. X-ray diffractometer, scanning electron microscopy and fourier transform infra-red were used...

متن کامل

Cathodic electrodeposion of nano Titania along the epoxy based coating and evaluation of its anticorrosion properties

Effect of nano TiO2 particles on the corrosion properties of an epoxy based coatings was investigated. Coatings and nano Titania were applied on standard phosphated steel panels by cathodic electrodeposition simultaneously. The coated panels were immerged in 3.5 NaCl solution for 2880 hours 120 days. The SEM and EIS technique were used to investigate the electrodeposion of nano Titania particle...

متن کامل

High Speed Preparation of GdCaAl3O7:Eu Nano-Phosphors by Microwave-Assisted Combustion Approach

GdCaAl3O7:Eu red nano-phosphors were synthesized by solution combustion using urea as fuel. Fourier-transform infrared, X-ray diffraction, scanning electron microscope, transmission electron microscope and photoluminescence spectrophotometer were used to characterize the obtained samples. XRD patterns revealed that GdCaAl3O7:Eu pure phase was formed by combustion of metal nitrate solution in th...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2010