NDE Applications of Air-Coupled Ultrasonic Transducers

نویسندگان

  • W. A. Grandia
  • C. M.
چکیده

Abslract In recent years, several new NDE applications of air-coupled, as opposed to liquid-coupled, ultrasonics have been seriously pursued. The applications range from throughtransmission testing of aerospace laminates and various honeycomb or foam filled materials, and solar cells, to pulseecho flaw detection in plastic electronic packaging materials and in-line inspection of large-diameter gas pipelines. Most of the new applications have been made possible by major advances in component technologies: transducers, preamplifiers, pulsers, signal-conditioning, and impedance matching and noise-matching circuits. In this paper, we describe the transducer types and circuit topologies that are especially suitable for applications in the 20 kHz to 20 MHz frequency region. We also address the important key differences between airsoupled and liquid-coupled inspection configurations. In particular, we focus on the practical advantages and limitations that arise h m the fact that gases and liquids exhibit substantially different specific densities and sound speeds.

برای دانلود رایگان متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Air Coupled Through Transmission of Aluminum and other Recent Results Using MUTs

Abstmct-The air-coupled transmissionof 2.3 MHz micromachined, narrow band devices operating at longitudinal ultrasonic waves through aluminum is 2.3 MHz, These microfabricated ultrasonic transreported. Microfabricated ultrasonic transducers are used to emit and receive the ultrasonic tone ducers (MUTs) have a dynamic range of 110 dB, burst. The signal at the receiver is so dB above and are th...

متن کامل

NDE Studies on Spacecraft Structural Components Using Aircoupled Ultrasonic and Thermography Techniques

The two Non-Destructive Evaluation [ NDE ] techniques viz., Air Coupled Ultrasonic [ACU ] and Pulsed Thermography [PT ] find many applications in aerospace industry . These NDE techniques can be used for debond detection in spacecraft structural components like honeycomb sandwich deck plates, shear web panels and central cylinder made of aluminum core and composite face sheets. The Air coupled ...

متن کامل

Air Coupled Ultrasonic Inspection of Steel Rubber Interface

This paper describes the investigation for the feasibility of inspection of steel-rocasin rubber specimen used in rocket motor for detection of debond by using air-coupled ultrasonic. A pair of high performance air-coupled transducers was used to generate and receive the high intensity ultrasonic pulses. Probes were placed at the opposite side of the specimen during inspection. It was shown tha...

متن کامل

Swept Frequency Multiplication (sfm) Techniques for Improved Air-coupled Ultrasonic Nde

A new technique has been investigated for improving the signals that can be obtained in air-coupled NDE. This relies on the broad bandwidth available from polymer-filmed capacitive transducers. The technique relies on a swept-frequency "chirp" signal, which is transmitted from a transducer in air, passes through the sample under test, and is then detected at the far side using a separate receiv...

متن کامل

Optimization of Ultrasonic Phased Arrays

Ultrasonic phased arrays are an emerging technology in nondestructive evaluation (NDE) applications. A phased array is a multi-element piezo-electric device whose elements are individually excited by electric pulses at programmed delay times [1]. Such a delay scheme allows electronically controlled dynamic beam control. One of the advantages of using phased arrays in NDE applications over conve...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2000