Factorial Design Approach in Proportioning Prestressed Self-Compacting Concrete
نویسندگان
چکیده
In order to model the effect of mixture parameters and material properties on the hardened properties of, prestressed self-compacting concrete (SCC), and also to investigate the extensions of the statistical models, a factorial design was employed to identify the relative significance of these primary parameters and their interactions in terms of the mechanical and visco-elastic properties of SCC. In addition to the 16 fractional factorial mixtures evaluated in the modeled region of -1 to +1, eight axial mixtures were prepared at extreme values of -2 and +2 with the other variables maintained at the central points. Four replicate central mixtures were also evaluated. The effects of five mixture parameters, including binder type, binder content, dosage of viscosity-modifying admixture (VMA), water-cementitious material ratio (w/cm), and sand-to-total aggregate ratio (S/A) on compressive strength, modulus of elasticity, as well as autogenous and drying shrinkage are discussed. The applications of the models to better understand trade-offs between mixture parameters and carry out comparisons among various responses are also highlighted. A logical design approach would be to use the existing model to predict the optimal design, and then run selected tests to quantify the influence of the new binder on the model.
منابع مشابه
Developing a Cost-Effective Approach for Enhancing the Rheological and Mechanical Behavior of High Strength Self-Compacting Concrete
Despite the numerous advantages of using concrete with high strength capacity, the brittle behavior of high strength concrete (HSC) and higher production cost has limited its use in the construction industry. This research aims to develop a cost-effective approach for production of high strength self-compacting concrete with desirable performance in either compressive or tensile loading conditi...
متن کاملApplication of Nanotechnology in Self-Compacting Concrete Design
In this study, first, different mix design of four types of Self-Compacting Concrete (SCC), 1. SCC consisted of only nanosilica, 2. SCC included only microsilica, 3. SCC consisted of both microsilica and nanosilica and 4. SCC without microsilica and nanosilica called as control mix, were casted and tested to find out the values of the Slump Flow, L-Box and 7 and 28 days compressive strength. Th...
متن کاملStrain and Damage Sensing Property of Self-compacting Concrete Reinforced with Carbon Fibers
Present paper investigated the strain and damage sensing property on concrete cubes embedded with carbon fibers. Concrete cubes of dimension 150 mm have been casted with different concentration of carbon fibers to study the strain and damage sensing property under cyclic loading that can be further used for health monitoring as non-destructive testing (NDT) approach. All the specimens were test...
متن کاملInvestigating properties of fresh and hardened self-compacting concrete made of recycled aggregates
Self-compacting concrete is a new high performance concrete with high ductility and segregation resistance. In recent years, construction material manufacturers have focused their attention on lightweight concrete and have strived to use lightweight concrete, if possible, in load-bearing parts of buildings. Concrete with both self-compacting and lightweight properties is favourable in this cont...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره 8 شماره
صفحات -
تاریخ انتشار 2015