Ultimate Strength Analysis of Normal and High Strength Concrete Wall Panels with Varying Opening Configurations
نویسندگان
چکیده
منابع مشابه
Shear Capacity of Reinforced Concrete Flat Slabs Made with High-strength Concrete: A Numerical Study of the Effect of Size, Location, and Shape of the Opening (TECHNICAL NOTE)
Nowadays, concrete with strength higher than 50 MPa is utilized due to the ever increasing need for higher strength and prolonged healing properties. Despite the widespread use of high-strength concrete, only a few research projects have been conducted on the punching shear strength of high-strength concrete slabs. Reinforced concrete flat slabs are widely employed in structural systems. The lo...
متن کاملEffect of type and distribution of shear studs on the behavior of composite steel-concrete shear walls
In this research in-plane shear Behavior of composite steel-concrete shear walls was investigated considering the Effects of steel plates thickness, spaces between shear studs, shape and type of shear studs and existing of minimum reinforcement in wall section. Several finite element models were analyzed and Numerical results of two models were taken under verification with existent experimenta...
متن کاملUltimate Unbonded Tendon Stress in CFRP Strengthened Post-Tensioned Indeterminate I-Beams Cast with HSCs
Based on the bending experiment for two-span continuous post-tension beams with unbounded tendons and externally applied CFRP sheets, the analysis of the stress increment of unbonded tendons is monitored in the loading process. Since self-compacting concrete (SCC) is a suitable innovation,, understanding the implementation of this type of concrete on the ultimate unbonded tendon stress is criti...
متن کاملPalm kernel fruit fiber reinforced gypsum-cement based wall panels: It’s physical and mechanical characteristics
Agricultural waste fibers have been found to be suitable as reinforcement in cement-based composites, but studies on oil palm fiber as reinforcement in gypsum-cement wall panels are scarce. A mixture of two equal weights of gypsum and cement, with water-binder ratios of 0.45 and 0.55 were prepared. In each mix a varying percentage of fiber contents of 2%, 3% and 4% by weight of the binders were...
متن کاملEvaluation of Ultimate Torsional Strength of Reinforcement Concrete Beams Using Finite Element Analysis and Artificial Neural Network
Due to lack of theory of elasticity, estimation of ultimate torsional strength of reinforcement concrete beams is a difficult task. Therefore, the finite element methods could be applied for determination of strength of concrete beams. Furthermore, for complicated, highly nonlinear and ambiguous status, artificial neural networks are appropriate tools for prediction of behavior of such states. ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2017