A Computer Aided Kineto-Static Analysis Method for 3-RRRT Parallel Manipulator Based on Vector Bond Graph
نویسندگان
چکیده
For improving the reliability and efficiency of the kineto-static analysis of complex robot systems, the corresponding vector bond graph procedure is proposed. By the kinematic constraint condition, the vector bond graph model of universal joint are made. Based on this, the vector bond model of 3-RRRT parallel Manipulator is built. For solving the algebraic difficulties brought by differential causality in system automatic kineto-static analysis, the effective bond graph augment method is proposed. From the algebraic relations of input and output vectors in the basic fields, junction structure and Euler-junction structure of system vector bond graph model, the unified formulae of driving moment (or force) and constraint forces at joints are derived, which are easily derived on a computer in a complete form. As a result, the automatic kineto-static analysis of 3-RRRT parallel Manipulator is realized, the validity of the method presented here is illustrated.
منابع مشابه
3-RPS Parallel Manipulator Dynamical Modelling and Control Based on SMC and FL Methods
In this paper, a dynamical model-based SMC (Sliding Mode Control) is proposed fortrajectory tracking of a 3-RPS (Revolute, Prismatic, Spherical) parallel manipulator. With ignoring smallinertial effects of all legs and joints compared with those of the end-effector of 3-RPS, the dynamical model ofthe manipulator is developed based on Lagrange method. By removing the unknown Lagrange multipliers...
متن کاملInterval Analysis of Controllable Workspace for Cable Robots
Workspace analysis is one of the most important issues in the robotic parallel manipulator design. However, the unidirectional constraint imposed by cables causes this analysis more challenging in the cabledriven redundant parallel manipulators. Controllable workspace is one of the general workspace in the cabledriven redundant parallel manipulators due to the dependency on geometry parameter...
متن کاملCartesian Stiffness Matrix Mapping of a Translational Parallel Mechanism with Elastic Joints
This paper is devoted to calculating the Cartesian stiffness matrix of a translational parallel manipulator with elastic joints. The calculation takes into account the contribution of the Jacobian variation because of the change of manipulator configuration due to the elasticity and it covers the entire theoretical workspace of the manipulator. Three kineto‐static adimension...
متن کاملFramework Comparison Between a Multifingered Hand and a Parallel Manipulator
In this paper we apply the kineto-static mathematical models commonly used for robotic hands and for parallel manipulators to an example of handplus-object (parallel manipulator) with three fingers (legs), each with two phalanges (links). The obtained analytical matrix expressions that define the velocity and static equations in both frameworks are shown to be equivalent. This equivalence clari...
متن کاملAn Efficient Algorithm for Workspace Generation of Delta Robot
Dimensional synthesis of a parallel robot may be the initial stage of its design process, which is usually carried out based on a required workspace. Since optimization of the links lengths of the robot for the workspace is usually done, the workspace computation process must be run numerous times. Hence, importance of the efficiency of the algorithm and the CPU time of the workspace computatio...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2013