Dispersion and stabilization of TiN and TiC nanoparticles in organic suspensions
نویسندگان
چکیده
In this work the stability of TiN and TiC nanopowders in isopropyl alcohol as well as the fabrication of dense and well adhered thin coatings based on TiN and TiC by electrophoretic deposition (EPD) have been evaluated in terms of zeta potential and mass deposited when hydrazine is added. The surface of TiN and TiC nanoparticles has been modified to improve the dispersion in isopropyl alcohol adding a cationic polymer (polyethylenimine) as dispersant with two different molecular weights. The influence of acidic/basic character of the solvent also has been evaluated in order to reach the most efficient EPD process. It was found that the adsorption of polyethylenimine with higher molecular weight can preserve the homogeneity of TiC coatings. The surface of TiN nanoparticles can be tuned in order to achieve a similar polyethylenimine adsorption which also improves the deposition in basic media.
منابع مشابه
INVESTIGATING DISPERSION AND RHEOLOGICAL BEHAVIOR OF IONICALLY STABILIZED AQUEOUS A-ALUMINA SUSPENSION
Dispersion and rheological behaviors of ionically stabilized aqueous alpha alumina suspensions were investigated in various pH values (3, 11) and solid volume fractions (4, 7, 10, 15) Vol% using sedimentation experiment as well as viscosity measurement. Interface separating porous-packed sediment from a relatively clear supernatant at pH 11 was measured over 20 hours with the aim of obtaining l...
متن کاملDehydrogenation of Isobutane Over Nanoparticles of Pt/Sn Alloy on Pt/Sn/Na-Y Catalyst: The Effect of Tin Precursor on the Catalyst Behavior
In this research Na-Y was synthesized by hydrothermal method and used as support for preparation of Sn/Pt/Na-Y catalysts using two different tin precursors, Bu3Sn(Cl) and SnCl2.2H2O, by sequential impregnation, in which the Pt was deposited first and in the next step Sn was deposited. The catalysts were characterized by H2 chemisorption, transmis...
متن کاملEffects of Nanoclay on Cellular Morphology and Water Absorption Capacity of Poly(vinyl alcohol) Foam
The present work was aimed to examine the effects of incorporation of each of two different types of nanoclay, i.e. Cloisite Na+ and Cloisite 30B, into PVA foam on cellular morphology and water absorption capacity. Foam samples containing 0.0-10.0 wt% of each of the two types of nanoclay alone were prepared using mechanical foaming. Accordingly, PVA/organoclay/water suspensions were prepare...
متن کاملDispersion Properties of Nano YSZ Particles in Aqueous Suspensions
In the present research, the aqueous suspensions of nano-sized YSZ particles were prepared using a common and available dispersant (Dolapix CE64) at different pH values and their stability were evaluated through the sedimentation height, viscosity measurement, and microstructural observation. Different amounts of dispersant were tested and the optimum percentage was examined by measuring the vi...
متن کاملElectrochemical properties of core-shell TiC-TiO2 nanoparticle films immobilized at ITO electrode surfaces.
Titanium carbide (TiC) nanoparticles are readily deposited onto tin-doped indium oxide (ITO) electrodes in the form of thin porous films. The nanoparticle deposits are electrically highly conducting and electrochemically active. In aqueous media (at pH 7) and at applied potentials positive of 0.3 V vs. SCE partial anodic surface oxidation and formation (at least in part) of novel core-shell TiC...
متن کامل