Influence of Ortho - H 2 Clusters on the Mechanical Properties of Solid
نویسنده
چکیده
The quantum diffusion of ortho-H2 impurities in solid para-H2 has been investigated with a torsional oscillator technique. The unclustering dynamics of agglomerated impurities with increasing temperature are found to greatly affect the resonant period of oscillation. Based on the observed trends in both experimental data and complementary finite element calculations, we find that the oscillation period predominantly reflects changes in the solid’s elastic response to the minute inertial stresses imposed on it. It is likely that the small but abrupt increase in the resonant period observed above 100 mK in high purity H2 samples is due to the interplay between remnant ortho-H2 impurities and dislocations, and not a signature of a supersolid to normal solid transition.
منابع مشابه
Evaluation of solid oxide fuel cell anode based on active triple phase boundary length and tortuosity
An efficient procedure is presented for the evaluation of solid oxide fuel cell (SOFC) anode microstructure triple phase boundary length (TPBL). Triple phase boundary- the one that is common between three phases of the microstructure- has a great influence on the overall efficiency of SOFC because all electrochemical reactions of anode take place in its vicinity. Therefore, evaluation of TP...
متن کاملEvaluation of solid oxide fuel cell anode based on active triple phase boundary length and tortuosity
An efficient procedure is presented for the evaluation of solid oxide fuel cell (SOFC) anode microstructure triple phase boundary length (TPBL). Triple phase boundary- the one that is common between three phases of the microstructure- has a great influence on the overall efficiency of SOFC because all electrochemical reactions of anode take place in its vicinity. Therefore, evaluation of TP...
متن کاملTi-Cr-N Coatings Deposited by Physical Vapor Deposition on AISI D6 Tool Steels
In this study, physical vapor deposition (PVD) Ti-Cr-N coatings were deposited at two different temperatures 100 and 400ºC on hardened and tempered tool steel substrates. The influence of the applied deposition temperature on the physical and mechanical properties of coatings such as roughness, thickness, phase composition, hardness and Young’s modulus were evaluated. Phase compositions were st...
متن کاملThe Effects of Carbon Nanotube Orientation and Aggregation on Static Behavior of Functionally Graded Nanocomposite Cylinders
In this paper, the effects of carbon nanotube (CNT) orientation and aggregation on the static behavior of functionally graded nanocomposite cylinders reinforced by CNTs are investigated based on a mesh-free method. The used nanocomposites are made of the straight CNTs that are embedded in an isotropic polymer as matrix. The straight CNTs are oriented, randomly or aligned or local aggregated int...
متن کاملInfluence of the Elastic Foundation on the Free Vibration and Buckling of Thin-Walled Piezoelectric-Based FGM Cylindrical Shells Under Combined Loadings
In this paper, the influence of the elastic foundation on the free vibration and buckling of thin-walled piezoelectric-based functionally graded materials (FGM) cylindrical shells under combined loadings is investigated. The equations of motion are obtained by using the principle of Hamilton and Maxwell's equations and the Navier's type solution used to solve these equations. Material propertie...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2009