Mechanical Behaviour of Commercial Aluminium Wrought Alloys at Low Temperatures
نویسندگان
چکیده
منابع مشابه
THERMAL ANALYSIS AND KINETICS OF THE PRECIPITATION IN WROUGHT Al-Mg, Al-Mg-ScAND Al-Mg-Sc-Me (Me=Zr, Ti) ALLOYS
Precipitation behaviour of wrought Al-6Mg alloys with ternary scandium and quaternary zirconium and titanium has been studied. Hardness measurements and resistivity studies are employed to assess the precipitation behaviour of scandium doped Al-6Mg alloy without or with quaternary additions of zirconium and titanium. Further, the kinetics of precipitations are studied by differential scanning c...
متن کاملInfluence of heat treatment on the microstructure and mechanical properties of 6005 and 6082 aluminium alloys
The main task of this work was to study the influence of the cooling conditions after homogenization of the 6082 aluminium alloys. The effect of the solution heat treatment temperature on the mechanism and ageing kinetics of the two commercial wrought aluminum alloys 6005 and 6082 was also analyzed. The alloys were heat treated—T4 with a wide range of solution heat treatment temperature from 51...
متن کاملSimulation of Mechanical Behaviour of Cast Aluminium Components: A Literature Review
A literature review on methods to consider mechanical behaviour of cast aluminium alloys in finite element method (FEM) simulations of cast aluminium components has been performed. The mechanical behaviour is related to several microstructural parameters achieved during the casting process. Three different methods to consider these microstructural parameters are introduced. One method predicts ...
متن کاملINFLUENCE OF MECHANICAL ALLOYING AND LEAD CONTENT ON MICROSTRUCTURE, HARDNESS AND TRIBOLOGICAL BEHAVIOR OF 6061 ALUMINIUM ALLOYS
In the present work, one batch of prealloyed 6061Al powder was processed by mixing and another one was ball milled with varying amount of lead content (0-15 vol. %). These powders were compacted at 300MPa and sintered at 590˚C under N2. The instrumented hardness and the young’s modulus of as-sintered 6061Al-Pb alloys were examined as a function of lead content and processing route. The we...
متن کاملMechanical and Tribological Behaviour of Aluminium Metal Matrix Composites Using Powder Metallurgy Technique— a Review
Aluminium metal matrix composites are widely used in engineering applications, specially automobile, aerospace, marine and mineral processing industries owing to their improved wear properties compared to conventional monolithic aluminium alloys. Presently hybrid composites plays vital role in engineering application. The researchers who developed composites, were subjected to many characterisa...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2017