Towards biodegradable polyolefins: strategy of anchoring minute quantities of monosaccharides and disaccharides onto functionalized polystyrene, and their effect on facilitating polymer biodegradation.
نویسندگان
چکیده
A hypothesis was developed, and successfully tested, to greatly increase the rates of biodegradation of polyolefins, by anchoring minute quantities of glucose, sucrose or lactose, onto functionalized polystyrene (polystyrene-co-maleic anhydride copolymer) and measuring their rates of biodegradation, which were found to be significantly improved.
منابع مشابه
Biodegradation of Styrene-Butadiene-Styrene Coploymer via Sugars Attached to the Polymer Chain
A synthetic method was developed to chemically attach few molecules of simple sugars like glucose, mannose, galactose, maltose and xylose (0.09 0.37 wt%) and with quaternary nitrogen pendants (0.42 0.46 atomic%) along the polybutadiene section of polystyrene-block-polybutadiene-block-polystyrene (SBS) block copolymer. These functionalized SBS copolymers were evaluated for biodegradation using t...
متن کاملChanges in crystallinity of HDPE films containing different amounts of an oxo-biodegradable additive due to UVC exposure
Crystallinities of high-density polyethylene (HDPE) films containing various amounts of an oxo-biodegradable additive (HES-W) were investigated immediately after preparation and 6 weeks after ultraviolet (UV) irradiation (λ=254 nm). HDPE granules were mixed with oxo-biodegradable masterbatch in a twin-screw extruder and the extrudates were converted into films with thicknesses of 35±5 micromete...
متن کاملMelt free-radical grafting of glycidyl methacrylate (GMA) onto EPDM backbone and effect of EPDM-g-GMA on the morphology and mechanical properties of PS/EPDM/PA6 ternary blends
Melt free-radical grafting reactions between ethylene-propylene-dieneterpolymer (EPDM) and glycidyl methacrylate (GMA) were investigated in a batch mixer (170°C, 60rpm). Effect of dicumylperoxide (DCP) initiator and GMA functionalizing monomer concentrations was studied on the grafted EPDM characteristics. Titration results indicated an increase in the graft degree (GD) and gel content (GC) val...
متن کاملEffect of temperature, heating rate and zeolite-based catalysts on the pyrolysis of high impact polystyrene (HIPS) waste to produce fuel-like products
Pyrolysis of high impact polystyrene (HIPS) waste has been investigated under different process parameters, such as temperature, heating rate and types of zeolitic catalysts to produce valuable liquid products. Liquid, gas and coke as products of pyrolysis and aromatic, naphthene, olefin and paraffin as liquid components were obtained and their molecular weight distributions were studied with c...
متن کاملNovel Functionalized Polyolefins as Compatibilizers in Polyolefin/polyamide 6 Blends and Polyethylene/metal Hydroxide Composites
Ricinoloxazoline maleinate (OXA) was grafted by melt free radical grafting onto polyolefins and elastomers to produce new compatibilizers for polymer blends. Effects of initial monomer and peroxide concentrations on the degree of grafting, on the amount of residual monomer, and on the side reactions were investigated. Reactive compatibilizers could be prepared with a suitable choice of processi...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- Chemical communications
دوره 23 شماره
صفحات -
تاریخ انتشار 2002