Effects of human limb gestures on galvanic coupling intra-body communication for advanced healthcare system
نویسندگان
چکیده
BACKGROUND Intra-Body Communication (IBC), which utilizes the human body as the transmission medium to transmit signal, is a potential communication technique for the physiological data transfer among the sensors of remote healthcare monitoring system, in which the doctors are permitted to remotely access the healthcare data without interrupt to the patients' daily activities. METHODS This work investigates the effects of human limb gestures including various joint angles, hand gripping force and loading on galvanic coupling IBC channel. The experiment results show that channel gain is significantly influenced by the joint angle (i.e. gain variation 1.09-11.70 dB, p < 0.014). The extension, as well as the appearance of joint in IBC channel increases the channel attenuation. While the other gestures and muscle fatigue have negligible effect (gain variation <0.77 dB, p > 0.793) on IBC channel. Moreover, the change of joint angle on human limb IBC channel causes significant variation in bit error rate (BER) performance. CONCLUSIONS The results reveal the dynamic behavior of galvanic coupling IBC channel, and provide suggestions for practical IBC system design.
منابع مشابه
A Novel Field-Circuit FEM Modeling and Channel Gain Estimation for Galvanic Coupling Real IBC Measurements
Existing research on human channel modeling of galvanic coupling intra-body communication (IBC) is primarily focused on the human body itself. Although galvanic coupling IBC is less disturbed by external influences during signal transmission, there are inevitable factors in real measurement scenarios such as the parasitic impedance of electrodes, impedance matching of the transceiver, etc. whic...
متن کاملDevelopment and Prospect of Implantable Intra-Body Communication Technology
The intra-body communication is an emerging wireless communication technology. It gives rise to slight wound without any infection, makes relevant devices positioned more easily and plays an important role in realtime monitoring of human body. According to coupling modes of electrodes, the intra-body communication is classified into two types, the capacitive and the galvanic coupling intra-body...
متن کاملA Finite-Element Simulation of Galvanic Coupling Intra-Body Communication Based on the Whole Human Body
Simulation based on the finite-element (FE) method plays an important role in the investigation of intra-body communication (IBC). In this paper, a finite-element model of the whole body model used for the IBC simulation is proposed and verified, while the FE simulation of the galvanic coupling IBC with different signal transmission paths has been achieved. Firstly, a novel finite-element metho...
متن کاملPerformance Comparison between Intra-Body and Radio Frequency Wireless Communication for Foot Plantar Pressure Measurement
The sharp boost in healthcare demand has seen novel developments in health monitoring technologies, such as Intra-body communication (IBC). IBC technology envisions a network of continuously operating sensors that measure critical physical and physiological parameters, such as mobility, heart rate and glucose levels just to name a few. Wireless connectivity in IBC technology is the key to its s...
متن کاملModeling and Simulation of Galvanic Coupling Intrabody Communication
Intra-Body communication (IBC) is an innovative approach outlined in the IEEE 802.15.6 Wireless Body Area Network (WBAN) standard. This data communication method uses the human body as a communication medium. The basic principle of IBC is that a small electric field is induced onto the human body in order to propagate a signal between devices. IBC system assures transmissions between sensors th...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره 15 شماره
صفحات -
تاریخ انتشار 2016