Creep Deformation Measurement of 316H Stainless Steel Multi-pass Welded Joints using Digital Image Correlation

A high temperature measurement system for creep deformation based on the digital image correlation (DIC) technique is described. The new system is applied to study the behaviour of a multi-pass welded joint in a high temperature tensile test and a load controlled creep test at 545°C. Spatially resolved tensile properties and time dependent creep deformation properties across a thick section type 316 stainless steel multi-pass welded joint are presented and discussed. Significantly lower creep strain rates are observed in the HAZ than in the parent material which is attributed to the introduction of substantial plastic strain in the parent material on initial loading. The weld metal shows the fastest creep rates and a variation that appears to correlate with individual weld passes. The visual information provides not only the local creep strain distribution but also the reduction of area and true stress distribution based on strains measured in the transverse direction. The results demonstrate the capability of the DIC technique for full field measurement of displacement and strain at high temperature long term creep tests.