Calibration transfer from dispersive instruments to handheld spectrometers.

نویسندگان

  • Juan Antonio Fernández Pierna
  • Philippe Vermeulen
  • Bernard Lecler
  • Vincent Baeten
  • Pierre Dardenne
چکیده

The Foss NIRSystem 6500 is one of the most commonly used laboratory instruments in agriculture and in particular in feed. New technological developments include micro-electro mechanical system (MEMS) technology, used in miniature handheld instruments such as the Polychromix Phazir spectrometer that are increasingly required for on-site analysis. The objective of this study was to assess the potential of a calibration transfer from the Foss NIRSystem 6500 to the Polychromix Phazir. The results show that good calibration models were obtained for various feed properties (fat, fiber, protein, and starch) developed on a Foss NIRSystem 6500, based on a spectral database of 9164 samples transferred to a Polychromix Phazir handheld spectrometer.

برای دانلود رایگان متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Multi-way based calibration transfer between two Raman spectrometers.

A standardization algorithm based on the application of Tucker3 models on the tensorized measurement signals is proposed to transfer calibration information between two Raman spectrometers. The secondary instrument in this study is a low cost and portable CCD based unit employing an efficient 532 nm green laser. The primary instrument is a high performance Fourier-transform based laboratory ins...

متن کامل

Xrf Analysis of Harmful Metals Collected onto Filters as Thin Layers from Workplace Air: Inter-laboratory Exercise

An inter-laboratory exercise has been carried out to evaluate the analytical performance of Method for Determining Hazardous Substances: MDHS 91 for determining Metals and metalloids in workplace air by X-ray fluorescence spectrometry, published by the Health and Safety Executive, United Kingdom. Sets of prepared filter standards were used to “transport” a master calibration established on an X...

متن کامل

Exploring the relationship between ergonomics and measurement quality in handheld FTIR spectrometers

The differences in spectrometers designed for use in the lab from those that are deployed at-site, in fi eld locations are rather profound. As an example, laboratory instruments are designed to work on a planar horizontal surface — the bench top — whereas handheld spectrometers are often called upon to operate in virtually every physical position. Interferometers used in lab FTIR spectrometers ...

متن کامل

MEMS-based Spectrometric Sensor for the Measurement of Dissolved CO2

In the last few years several types of MEMS-based spectrometer systems emerged, mainly addressing the NIR spectral range. The presented MEMS-based sensor prototype operates in the mid-IR range between 2200 cm and 2500 cm. The main element is a blazed micro-electro-mechanical reflective grating device with an aperture of 3x3 mm2. The optical setup of the sensor corresponds to a Czerny-Turner typ...

متن کامل

Calibration and monitoring of spectrometers and spectrophotometers.

We have delineated some of the factors affecting the performance of spectrometers and spectrophotometers in the clinical laboratory and have presented some of the methods for verifying that these instruments are functioning properly. At a minimum, every laboratory should perform periodic inspections of spectrometric functions to check wavelength calibration, linearity of detector response, and ...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

عنوان ژورنال:
  • Applied spectroscopy

دوره 64 6  شماره 

صفحات  -

تاریخ انتشار 2010