The Effect of Radiation Losses on High Frequency PCB Performance
نویسنده
چکیده
Radiation losses can be a disruptive force for many different reasons. Designs which are sensitive to EMI (ElectroMagnetic Interference) can be affected by radiation loss of a circuit and specifically how the radiated energy may corrupt neighboring circuits. Also the performance of loss-sensitive systems can be impacted with the addition of radiation loss when it is not fully considered. Finally, broadband high frequency RF and millimeter-wave applications certainly have issues with radiation loss and designers expend many efforts to account for these losses.
منابع مشابه
Decomposition of Askarel Oil by Microwave Radiation and H202/TiO2 Agents in order to reduce occupational hazards
Background: Poly chlorinated biphenyls (PCBS) are the groups of organic chemical material and toxic, persistent, bio accumulate and pose a risk of causing adverse effects to human health and the environment. PCB compounds are caused the different health effects in human depending of age, sex, route of entry, intensity and frequency exposure. This study was conducted to determine the effect of...
متن کاملEffects of the Spacer Length on the High-Frequency Nanoscale Field Effect Diode performance
The performance of nanoscale Field Effect Diodes as a function of the spacer length between two gates is investigated. Our numerical results show that the Ion/Ioff ratio which is a significant parameter in digital application can be varied from 101 to 104 for S-FED as the spacer length between two gates increases whereas this ratio is approximately constant for M-FED. The high-frequency perform...
متن کاملUsing Pre-Emphasis and Equalization with Stratix GX
New high speed serial interfaces provide a major benefit to designers looking to provide greater data bandwidth across the backplanes or when interfacing chip to chip. However high speed signaling techniques suffer from a number of issues not seen at normal digital signaling levels. One key problem, which applies to all transmission mediums, but particularly related to PCB layout, are frequency...
متن کاملDegradation of Transformer Oil (PCB Compounds) by Microwave Radiation, Ethanol Solvent, Hydrogen Peroxide and Dioxide Titanium for Reducing Environmental Hazards
Background: Poly chlorinated biphenyls (PCBs) are a class of chlorinated organic chemicals that do not easily degrade in the environment. This study was conducted to determine the effect of microwave rays, hydrogen peroxide, dioxide titanium and ethanol solvent on the degradation of PCBs. Methods: A 900w domestic MW oven with a fixed frequency of 2450 MHZ was used to provide MW irradiation. R...
متن کاملCharacterization of Printed Circuit Board Material & Manufacturing Technology for High Frequency
Today ́s Electronic Industry is changing at a high pace. The root causes are manifold. So world population is growing up to eight billions and gives new challenges in terms of urbanization, mobility and connectivity. Consequently, there will raise up a lot of new business models for the electronic industry. Connectivity will take a large influence on our lives. Concepts like Industry 4.0, intern...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2013