Metallic nanowires by full wafer stencil lithography.
نویسندگان
چکیده
Aluminum and gold nanowires were fabricated using 100 mm stencil wafers containing nanoslits fabricated with a focused ion beam. The stencils were aligned and the nanowires deposited on a substrate with predefined electrical pads. The morphology and resistivity of the wires were studied. Nanowires down to 70 nm wide and 5 mum long have been achieved showing a resistivity of 10 microOmegacm for Al and 5 microOmegacm for Au and maximum current density of approximately 10(8) A/cm(2). This proves the capability of stencil lithography for the fabrication of metallic nanowires on a full wafer scale.
منابع مشابه
Resistless Fabrication of Nanoimprint Lithography (NIL) Stamps Using Nano-Stencil Lithography
In order to keep up with the advances in nano-fabrication, alternative, cost-efficient lithography techniques need to be implemented. Two of the most promising are nanoimprint lithography (NIL) and stencil lithography. We explore here the possibility of fabricating the stamp using stencil lithography, which has the potential for a cost reduction in some fabrication facilities. We show that the ...
متن کاملThickness-controlled Metal Nanoscale Etch for Proposed Metal Nanowires Fabrication
A novel nanoscale etch process of metallic structures, the metal peel-off method(MPOM), is developed. The etching area can be defined photolithographically on the exposed substrate. Utilizing galvanic displacement as well as selective etching process after photolithographic process, we simply and uniformly achieve self-controlled etch rate of 32.2±2.1nm/times through whole wafer level. MPOM pro...
متن کاملFabrication of metallic nanowires and nanoribbons using laser interference lithography and shadow lithography.
Ordered and free-standing metallic nanowires were fabricated by e-beam deposition on patterned polymer templates made by interference lithography. The dimensions of the nanowires can be controlled through adjustment of deposition conditions and polymer templates. Grain size, polarized optical transmission and electrical resistivity were measured with ordered and free-standing nanowires.
متن کاملStencil Lithography for Scalable Micro- and Nanomanufacturing
In this paper, we review the current development of stencil lithography for scalable microand nanomanufacturing as a resistless and reusable patterning technique. We first introduce the motivation and advantages of stencil lithography for large-area microand nanopatterning. Then we review the progress of using rigid membranes such as SiNx and Si as stencil masks as well as stacking layers. We a...
متن کاملAmbipolar silicon nanowire FETs with stenciled-deposited metal gate
We report on a fully CMOS compatible fabrication method for ambipolar silicon nanowire FinFETs. The low thermal budget processing, compatible with monolithic 3D device integration, makes use of low pressure chemical vapor deposition (LPCVD) of amorphous Si (a-Si) and SiO2 layers as well as metal gate patterning using stencil lithography, demonstrated for the first time. FinFETs with stenciled A...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
- Nano letters
دوره 8 11 شماره
صفحات -
تاریخ انتشار 2008