Code: 3.3.02 Analysis of Different Types of Cementitious-based Composites Used as Shear Strengthening System for Reinforced Concrete Beams

نویسندگان

  • Christian BEAMS Escrig
  • Ernest Bernat - Masó
  • Lluís Gil
چکیده

The global tendency to apply sustainable criteria in most of the productive fields and the limited durability and the pathologies that reinforced concrete elements suffer are aspects that explain the increasing necessity of strengthening this type of structures. The evolution of strengthening techniques has consisted in the development of new technologies that ease the application of the solution and minimise the time structures are out of service. In this way, using composite materials in construction has represented a revolution in the strengthening of structures. The textile-reinforced mortar (TRM) is a composite material that combines textiles, made of high strength tensile fibres, with cementitious matrix. A remarkable feature of this solution is that it does not require organic resins for its manufacturing and application, unlike the techniques as fibre-reinforced polymer (FRP). The present work has consisted in the analysis of the mechanical and structural behaviour of reinforced concrete beams strengthened against shear stresses using different types of TRM. To fulfil this aim, an experimental campaign has been carried out. Nine reinforced concrete beams have been subjected to experimental tests, eight of them shear strengthened with four different combinations of textiles and mortars. Using the experimental data, an analytical study has compared the ultimate capacity of the reinforcements with the predictions obtained from three analytical models included in design standards of FRP and TRM. The results show that the strengthening system is able to increase an average of 33.7% the shear capacity of reinforced concrete beams. On the other hand, the results of analytical studies indicate that models adapted from FRP standards might show a better prediction capacity than the obtained with the code specifically developed for TRM reinforcements, which has performed significantly conservative. Euro-American Congress REHABEND 2016 1 REHABEND 2016. May 24-27, 2016. Burgos, Spain

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

An Experimental Study on Shear Strengthening of RC Lightweight Deep Beams Using CFRP

. This paper presents the results of an experimental investigation on shear strength enhancement of reinforced concrete deep beams externally reinforced with fiber reinforced polymer (FRP) composites. A total of six deep beam specimens of two different classes, as-built (unstrengthened) and retrofitted were tested in the experimental evaluation program. Two composite systems namely carbon/epoxy...

متن کامل

Experimental and Theoretical Investigation on Shear Strengthening of RC Precraced Continuous T-beams Using CFRP Strips

Carbon fiber reinforced polymer (CFRP) sheets are externally bonded to reinforced concrete (RC) members to provide additional strength such as flexural, shear, etc. It has been widely accepted that carbon fiber reinforced polymers (CFRPs) can be used effectively to strengthen reinforced concrete (RC) members. This paper is intended to study and use externally bonded CFRP strips to repair and st...

متن کامل

Adaptive Neural Fuzzy Inference System Models for Predicting the Shear Strength of Reinforced Concrete Deep Beams

A reinforced concrete member in which the total span or shear span is especially small in relation to its depth is called a deep beam. In this study, a new approach based on the Adaptive Neural Fuzzy Inference System (ANFIS) is used to predict the shear strength of reinforced concrete (RC) deep beams. A constitutive relationship was obtained correlating the ultimate load with seven mechanical a...

متن کامل

Reliabilty-based Torsional Design of Reinforced Concrete Beams Strengthened with CFRP Laminate

 The structural reliability of torsional concrete beams strengthened with full and strip wrapping of carbon fiber reinforced polymer (CFRP) laminate is investigated. The first order-second moment reliability method has been applied to make a reliability assessment on the torsional capacity design by technical guideline in Iran. The code No.345 published by the Management and Planning Organizati...

متن کامل

Flexural Strengthening of Deficient Reinforced Concrete Beams with Post-Tensioned Carbon Composites using Finite Element Modelling

The application of external post-tensioned steel bars as an effective way to strengthen an existing bridge has been so far used in many different countries. In recent decades, however, they have been replaced by bars made from Carbon Fiber Reinforced Polymer (CFRP), as a material with high tensile strength and corrosion resistance, to address several concerns with steel bars such as their appli...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2016