Ionic liquid-based zwitterionic organic polymer monolithic column for capillary hydrophilic interaction chromatography.

نویسندگان

  • Tingting Wang
  • Yihui Chen
  • Junfeng Ma
  • Xiaodan Zhang
  • Lihua Zhang
  • Yukui Zhang
چکیده

In the current study, a novel ionic liquid-based zwitterionic organic polymer monolithic column was developed by copolymerizing 1-vinyl-3-(butyl-4-sulfonate) imidazolium, acrylamide and N,N'-methylenebisacrylamide in a quaternary porogenic solvent consisting of formamide, dimethyl sulphoxide, polyethylene glycol 8000 and polyethylene glycol 10,000 for capillary hydrophilic interaction chromatography. The monolithic stationary phase was optimized by adjusting the amount of monomer in the polymerization solution along with the composition of porogenic solvent. The optimized monolith exhibited excellent selectivity and favorable retention for nucleosides and benzoic acid derivatives. The primary factors affecting the separation efficiency of the monolithic column (including acetonitrile content, pH, and buffer salt concentration in the mobile phase) have been thoroughly evaluated. Excellent reproducibility of the retention times for five nucleosides was achieved, with relative standard deviations of run-to-run (n = 3), column-to-column (n = 3) and batch-to-batch (n = 3) in the range of 0.18-0.48%, 2.33-4.20% and 3.07-6.50%, respectively.

برای دانلود رایگان متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Facile preparation of zwitterionic organic-silica hybrid monolithic capillary column with an improved "one-pot" approach for hydrophilic-interaction liquid chromatography (HILIC).

A simple single-step thermal-treatment "one-pot" approach for the preparation of organic-silica hybrid capillary monolithic columns is described. In this improved method, the cross-linker vinyltrimethoxysilane (VTMS) was replaced by 3-methacryloxypropyltrimethoxysilane (γ-MAPS), which is more active in polymerization reactions, and only one thermal treatment step was required in the preparation...

متن کامل

Selectivity tuning in pressurized capillary electrochromatography with a zwitterionic monolithic column.

A polymethacrylate-based capillary monolithic column with zwitterionic functional groups was prepared by an in situ copolymerization method. The column was used in pressurized capillary electrochromatography (pCEC) for the separation of a test mixture of basic, neutral and acidic analytes. Unique manipulation of selectivity in pCEC was demonstrated by fine-tuning the applied voltage. The separa...

متن کامل

Preparation and evaluation of a neutral methacrylate-based monolithic column for hydrophilic interaction stationary phase by pressurized capillary electrochromatography.

A polar and neutral polymethacrylate-based monolithic column was evaluated as a hydrophilic interaction capillary electrochromatography (HI-CEC) stationary phase with small polar-neutral or charged solutes. The polar sites on the surface of the monolithic solid phase responsible for hydrophilic interactions were provided from the hydroxy and ester groups on the surface of the monolithic station...

متن کامل

Highly efficient analysis of underivatized carbohydrates using monolithic-silica-based capillary hydrophilic interaction (HILIC) HPLC.

A polyacrylamide (PAAm)-modified monolithic silica capillary column of increased phase ratio, 200T-PAAm, for hydrophilic interaction liquid chromatography (HILIC) was prepared. The column showed high separation efficiency, with a theoretical plate height H = 7-20 microm at a linear velocity, u = 1-7 mm/s. From a kinetic plot analysis, it was expected that the monolithic column could provide thr...

متن کامل

Preparation and evaluation of a molecularly imprinted polymer derivatized silica monolithic column for capillary electrochromatography and capillary liquid chromatography.

A method for preparation of molecularly imprinted polymer (MIP) derivatized onto the surface of a monolithic silica capillary column was successfully developed. The vinyl groups were first introduced onto the silica monolith by immobilization of gamma-methacryloxypropyltrimethoxysilane. Then the MIP coating was copolymerized and anchored onto the surface of the silica monolith. Acetonitrile was...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

عنوان ژورنال:
  • The Analyst

دوره 140 16  شماره 

صفحات  -

تاریخ انتشار 2015