Techniques in the Nonlinear Dynamic Analysis of Seismic Isolated Structures
نویسنده
چکیده
منابع مشابه
Evaluation of the SEAOC/UBC97 Provisions for the Tall Base-Isolated Structures
The base isolation systems are among the passive control devices that have been used over the last three decades to limit the seismic-induced response of structures. In this regard, the Uniform Building Code provisions (UBC) has incorporated a special section for the seismic design of base isolated structures since its 1991 edition. Due to the importance of the behavior of these structures unde...
متن کاملEvaluation of the SEAOC/UBC97 Provisions for the Tall Base-Isolated Structures
The base isolation systems are among the passive control devices that have been used over the last three decades to limit the seismic-induced response of structures. In this regard, the Uniform Building Code provisions (UBC) has incorporated a special section for the seismic design of base isolated structures since its 1991 edition. Due to the importance of the behavior of these structures unde...
متن کاملSeismic Design of Steel Structures Based on Ductility and Incremental Nonlinear Dynamic Analysis
In this paper a simple tool for seismic design of steel structures for a selected ductility level is presented. For this purpose, a consistent set of earthquakes is selected and sorted based on the maximum acceleration of ground surface. The selected records are applied as the base motion to a single-degree-of-freedom system with strain hardening and the maximum response acceleration is determi...
متن کاملThe Effect of Axial Force Variations on Nonlinear Modeling and Seismic Response of Reinforced Concrete Structures
In order to increase the accuracy of evaluating seismic response of structures, it is critical to conduct dynamic analyses based upon precise nonlinear models being as consistent as possible with the real conditions of corresponding structures. The concentrated plasticity model including one elastic element and two nonlinear spring elements at both ends has been considered within the research c...
متن کاملThe Comparison of the IDA and ET on Steel Structures Rehabilitated by Isolators
Endurance time (ET) method is a relatively new performance-based earthquake method for structural evaluation and design. In this method, the structure is subjected to a gradually intensifying accelorogram(s) and its performance is assessed based on the maximum time duration that it can meet the specified performance objectives. Using moment-resisting and braced frames which are rehabilitated by...
متن کاملSeismic Vulnerability of Special Structures: A Case Study of Toos Power Plant Stack
The assessment of seismic performance of existing structures is becoming an important problem in earthquake engineering. Some important ructures are considerably old and, therefore, their strengths and ductilities are less than strength and ductility demands because of changes in codes and design methodologies. Such structures must be strengthened to resist future earthquakes. First, a structur...
متن کامل