Chapter 8 DISPLAY AND IMAGING SYSTEMS

نویسندگان

  • Hakan Urey
  • David L. Dickensheets
چکیده

MOEMS technology combining MEMS and micro-optics is well suited for manipulating light. A number of different ways can be envisioned to scan, steer, or modulate light beams using tiny electromechanical structures. MEMS mirrors or microlens arrays can be used to change the light beam propagation direction for scanning or modulating the beam, and diffraction gratings, optical choppers, or microinterferometers can be used as light modulators. MOEMS technology allows a large array of micromechanical light manipulators to be batch-fabricated at low cost. A good example of a successful MOEMS display product is the Texas Instruments digital micromirror device (DMD) display, which probably has the largest number of moving mechanical components (over 1 million) of any product. On the other hand, there are several cases where MEMS technology has not provided any performance and/or cost advantages over other methods of machining and assembly of components and devices. A number of MOEMS display and imaging products and technology demonstrators have been developed for defense, aerospace, industrial, medical, and consumer markets in the form of wearable displays, projection displays, imaging devices, barcode readers, and infrared imaging cameras. There are several alternative system architectures for these devices. In scanning beam systems, one biaxial or two uniaxial scanners can be used to draw a 2D raster pattern at some distance from the scanners, and they can be used to display or capture information. Alternatively, an array of micromechanical devices can be used to produce a line or a 2D array of pixels. Each pixel is a microelectromechanical element that displays or senses different pixel intensities or gray levels. This chapter discusses the application of MEMS technology for displays and visible and IR imaging systems. In the display section, examples of scanning beam and pixel-based display technologies are discussed. The imaging systems section discusses scanning-beam imaging systems and their applications

برای دانلود رایگان متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Design and Manipulation 3D Imaging System by using Photodiode Grid

Introduction: Radiation imaging is one of the applicable methods in diagnostic medicine and nondestructive testing for industrial applications. In nondestructive 3D imaging, in addition to the radiation source, there is a requirement for a suitable detection system, data acquisition system, mechanical sections for moving objects, reconstruction algorithm and finally a computer for processing an...

متن کامل

Biomedical Information Processing and Visualization for Minimally Invasive Neurosurgery

This chapter demonstrates a particular application of biomedical information processing and visualization techniques for minimally invasive diagnosis and therapy in neurosurgery. Computer-assisted surgical navigation provides surgeons valuable information on the precision location of surgical targets and critical areas, as well as the positions of surgical instruments. However, most navigation ...

متن کامل

Super-Resolution Thermal Image Reconstruction

Digital Infrared Thermal Imaging, Thermal Imaging or Thermography, could be the next chapter in safer, more effective screening for cancer, sport injuries including orthopedic issues and more. Unfortunately, thermal image camera resolution is considerably lower than of optical cameras, mostly only 160x120 or 320x240 pixels. The readout durability was still poor and needed improvement. In this p...

متن کامل

Safety Considerations on MRI Systems for Firefighters and Paramedics

Background and Objectives: The use of Magnetic Resonance Imaging (MRI) systems is on the rise and the number of installed systems is constantly increasing all over the world. This raises the possibility for emergency personnel to get in contact with these systems. However, the clothing and working material of paramedics and firefighters is not designed for the use on magnets. M...

متن کامل

Evaluation of gray scale changes of CBCT system images in different axis using the DICOM file

The images of dental CBCT imaging systems used in conic shaped beams, stored in the DICOM format, have various applications in the dentistry, including bone density estimation to select the location of the orthodontic implant, bone loss detection and etc. In these systems, unlike CT imaging systems, the resulting images exhibit gray-scale non-uniformity in each of the different axis in FOV. Thi...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2005