Investigating the Maximum Number of Real Solutions to the Power Flow Equations: Analysis of Lossless Four-Bus Systems
نویسندگان
چکیده
The power flow equations model the steady-state relationship between the power injections and voltage phasors in an electric power system. By separating the real and imaginary components of the voltage phasors, the power flow equations can be formulated as a system of quadratic polynomials. Only the real solutions to these polynomial equations are physically meaningful. This paper focuses on the maximum number of real solutions to the power flow equations. An upper bound on the number of real power flow solutions commonly used in the literature is the maximum number of complex solutions. There exist twoand three-bus systems for which all complex solutions are real. It is an open question whether this is also the case for larger systems. This paper investigates four-bus systems using techniques from numerical algebraic geometry and conjectures a negative answer to this question. In particular, this paper studies lossless, four-bus systems composed of PV buses connected by lines with arbitrary susceptances. Computing the Galois group, which is degenerate, enables conversion of the problem of counting the number of real solutions to the power flow equations into counting the number of positive roots of a univariate sextic polynomial. From this analysis, it is conjectured that the system has at most 16 real solutions, which is strictly less than the maximum number of complex solutions, namely 20. We also provide explicit parameter values where this system has 16 real solutions so that the conjectured upper bound is achievable.
منابع مشابه
Optimal Power Flow With Four Conflicting Objective Functions Using Multiobjective Ant Lion Algorithm: A Case Study of the Algerian Electrical Network
In this study, a multiobjective optimization is applied to Optimal Power Flow Problem (OPF). To effectively achieve this goal, a Multiobjective Ant Lion algorithm (MOALO) is proposed to find the Pareto optimal front for the multiobjective OPF. The aim of this work is to reach good solutions of Active and Reactive OPF problem by optimizing 4-conflicting objective functions simultaneously. Here a...
متن کاملOptimal Reconfiguration of Distribution Network for Power Loss Reduction and Reliability Improvement Using Bat Algorithm
In power systems, reconfiguration is one of the simplest and most low-cost methods to reach many goals such as self-healing, reliability improvement, and power loss reduction, without including any additional components. Regarding the expansion of distribution networks, communications become more complicate and the number of parameters increases, which makes the reconfiguration problem infeasib...
متن کاملSTATCOM Optimal Allocation in Transmission Grids Considering Contingency Analysis in OPF Using BF-PSO Algorithm
In this paper, a combinational optimization algorithm is introduced to obtain the best size and location of Static Compensator (STATCOM) in power systems. Its main contribution is considering contingency analysis where lines outages may lead to infeasible solutions especially at peak loads and it commonly can be vanished by load-shedding. The objective of the proposed algorithm is firstly to pr...
متن کاملHydrothermal Optimal Power Flow Using Continuation Method
The problem of optimal economic operation of hydrothermal electric power systems is solved using powerful continuation method. While in conventional approach, fixed generation voltages are used to avoid convergence problems, in the proposed algorithm, they are treated as variables so that better solutions can be obtained. The algorithm is tested for a typical 5-bus and 17-bus New Zealand networ...
متن کاملDistributed Generation Effects on Unbalanced Distribution Network Losses Considering Cost and Security Indices
Due to the increasing interest on renewable sources in recent years, the studies on integration of distributed generation to the power grid have rapidly increased. In order to minimize line losses of power systems, it is crucially important to define the size and location of local generation to be placed. Minimizing the losses in the system would bring two types of saving, in real life, one is ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
- CoRR
دوره abs/1603.05908 شماره
صفحات -
تاریخ انتشار 2016