X-Ray Peak Broadening Analysis in LaMnO3+δ Nano-Particles with RhombohedralCrystal Structure

نویسنده

  • A. Gholizadeh
چکیده

Received 10 April 2015 Accepted 11 October 2015 Available online 30 September 2015 In this work, structural and magnetic properties of the LaMnO3+δ compound prepared by citrate precursor method and annealed in the presence of oxygen are investigated. The structural characterization of LaMnO3+δ by X-ray powder diffraction and X‟pert package and Fullprof program provides evidence for a rhombohedral structure (R-3c space group) confirmed by FTIR measurement as well. The magnetic measurements show a superparamagnetic behavior of LaMnO3+δ due to low values of the coercive field and remanance magnetization and also high value of saturation magnetization. In addition, a comparative study of the crystallite size of the compounds obtained from powder XRD is reported. The Williamson-Hall analysis, size-strain plot and Halder-Wagner methods were used to study the individual contributions of the crystallite sizes and lattice micro-strain to isotropic line broadening of all the reflection peaks of the LaMnO3+δ compound. The results show that the Halder-Wagner method is more accurate, with all data points touching the fitting line better than in the other methods. The crystallite sizes estimated from XRD (30.86 nm) and particle size estimated from TEM method (36 nm) and also the magnetic core size (33.6 nm) estimated from magnetic measurement are in good agreement, while a little difference reflects a spherical shape of the nanoparticles.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

X-ray peak broadening analysis in LaMnO3+δ nano-particles with rhombohedral crystal structure

In this work, structural and magnetic properties of LaMnO3+δ compound prepared by citrate precursor method and annealed in presence of oxygen are investigated. The structural characterization of LaMnO3+δ by X-ray powder diffraction and using X’pert package and Fullprof program is evidence for a rhombohedral structure (R-3c space group) confirmed by FTIR measurement. The magnetic measurements sh...

متن کامل

مشخصه یابی و مکانیزم تشکیل نانوکامپوزیت زمینه آلومینیمی تقویت شده با ذرات TiO2 به روش آسیاب مکانیکی

In the present study, pure Aluminum powder with 5%wt Titanium Dioxide was mechanically milled at different times. Using phase analysis through X-ray diffraction (XRD), it was found that increasing of the milling times over 10 hours causes the reduction of Titanium by Aluminum and formation of Al2O3 in the structure. Also, it was shown that if the process persists, Aluminum reacts with Titanium ...

متن کامل

Nano-structural Characterization of Post-annealed ZnO Thin Films by X-ray Diffraction and Field Emission Scanning Electron Microscopy

ZnO thin films were deposited on Si(400) substrates by e-beam evaporation technique, and then post-annealed at different annealing temperatures (200-800°C). Dependence of the crystallographic structure, nano-strain, chemical composition and surface physical Morphology of these layers on annealing temperature were studied. The crystallographic structure of films was studied using X-Ray Diffracti...

متن کامل

Nano-structural Characterization of Post-annealed ZnO Thin Films by X-ray Diffraction and Field Emission Scanning Electron Microscopy

ZnO thin films were deposited on Si(400) substrates by e-beam evaporation technique, and then post-annealed at different annealing temperatures (200-800°C). Dependence of the crystallographic structure, nano-strain, chemical composition and surface physical Morphology of these layers on annealing temperature were studied. The crystallographic structure of films was studied using X-Ray Diffracti...

متن کامل

Effect of processing parameters on the mechano-chemical synthesis of nano crystalline Mo-Cu/Al2O3 composite

In this study, molybdenum-copper/alumina nano composite was synthesized with mechano-chemical method using high energy planetary ball milling. The molybdenum oxide, copper oxide and aluminum powder were used as starting materials and reaction appeared to occur through a rapid combustion reaction process. The evaluation of powder particles after different milling times was studied by X-ray diffr...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2015