Analysis of Modeling and Vibration Performance of a New Type of Cropping Machine
نویسندگان
چکیده
In order to reduce the cropping force and enhance the cropping cross-section quality, a new type of cropping machine is proposed in this paper. The basic structure and working principle of the cropping machine are introduced. Based on D'Alembert's principle, the vibration equations of the cropping machine along the Y direction, X direction and around X, Y, Z axis are built in detail and the motion curves of vibration body in all directions are also obtained. The amplitude frequency response characteristic curve of the vibration body in Y direction is given and the resonance angular frequency of vibration body in Y direction is about 7.94 rad/s. The cropping experimental results show that the cropping force acted on the metal bar is low and the cross-section quality is very high.
منابع مشابه
Machine learning algorithms in air quality modeling
Modern studies in the field of environment science and engineering show that deterministic models struggle to capture the relationship between the concentration of atmospheric pollutants and their emission sources. The recent advances in statistical modeling based on machine learning approaches have emerged as solution to tackle these issues. It is a fact that, input variable type largely affec...
متن کاملAnalysis of converter-permanent magnet synchronous machine set by improved average-value modeling
Dc excitation of the field winding in a synchronous machine can be provided by permanent magnets. Permanent magnet synchronous machine (PMSM) can offer simpler construction, lower weight and size for the same performance, with reduced losses and higher efficiency. Thanks to the mentioned advantages these motors are widely used in different application, therefore analysis and modeling of the...
متن کاملTransverse and longitudinal dynamic modeling of bimorph piezoelectric actuators with investigating the effect of vibrational modes
Bimorph piezoelectric cantilevered (BPC) actuators have recently received a great deal of attention in a variety of micro-electromechanical systems (MEMS) applications. Dynamic modeling of such actuators needs to be improved in order to enhance the control performance. Previous works have usually taken transv...
متن کاملNonlinear Vibration Analysis of a cantilever beam with nonlinear geometry
Analyzing the nonlinear vibration of beams is one of the important issues in structural engineering. According to this, an impressive analytical method which is called Modified Iteration Perturbation Method (MIPM) is used to obtain the behavior and frequency of a cantilever beam with geometric nonlinear. This new method is combined by the Mickens and Iteration methods. Moreover, this method don...
متن کاملModeling and analysis of a three-component piezoelectric force sensor
This paper presents a mathematical model for the vibration analysis of a three-component piezoelectric force sensor. The cubic theory of weakly nonlinear electroelasticity is applied to the model for describing the electromechanical coupling effect in the piezoelectric sensing elements which operate in thickness-shear and thickness-stretch vibration modes. Hamilton's principle is used to derive...
متن کامل