Effect of annealing temperature on properties of p-type conducting Al/SnO2/Al multilayer thin films deposited by sputtering

نویسندگان

  • Keun-Young Park
  • Geun-Woo Kim
  • Yong-Jun Seo
  • Si-Nae Heo
  • Hang Ju Ko
  • Sung-Hun Lee
  • Tae Kwon Song
  • Bon Heun Koo
چکیده

Keun-Young Park, Geun-Woo Kim, Yong-Jun Seo, Si-Nae Heo, Hang Ju Ko, Sung-Hun Lee, Tae Kwon Song and Bon Heun Koo* School of Nano & Advanced Materials Engineering, Changwon National University, Chang Won, Korea Photovoltaic and Optoelectronic device center, Korea Photonics Technology Institute (KOPTI), Gwangju, Korea Department of Material Processing, Advanced Thin Film Research Group, Korea Institute of Materials Science (KIMS), Changwon, Gyeongnam, Korea

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Influence of N2- and Ar-ambient annealing on the physical properties of SnO2: Co transparent conducting films prepared by spray pyrolysis technique

In this contribution, the Co doped SnO2 transparent semi-conducting films are prepared by spray pyrolysis technique and the influence of N2-and Ar-ambient annealing on their structural, electrical and optical properties are studied. The SnO2:Co thin films were deposited on the glass substrate at substrate temperature of 480 ˚C using an aqueous-ethanol solution consisting of tin and cobalt chlor...

متن کامل

Structural Properties of Post Annealed ITO Thin Films at Different Temperatures

Indium tin oxide (ITO) thin films were deposited on glass substrates by RF sputtering using an ITO ceramic target (In2O3-SnO2, 90-10 wt. %). After deposition, samples were annealed at different temperatures in vacuum furnace. The post vacuum annealing effects on the structural, optical and electrical properties of ITO films were investigated. Polycrystalline...

متن کامل

Investigation of Structural, Morphological and Optical Properties of Chromium Oxide Thin Films Prepared at Different Annealing Times

Chromium oxide (α-Cr2O3) thin films were prepared using thermal annealing of chromium (Cr)films deposited on quartz substrates by direct current (DC) magnetron sputtering. The annealingprocess of the films was performed for different times of 60, 120,180 and 240 min. The influenceof annealing time on structural, morphological and optical properties of the prepared films wasinvestigated by diffe...

متن کامل

Structural, Electrical and Optical Properties of Molybdenum Oxide Thin Films Prepared by Post-annealing of Mo Thin Films

Molybdenum thin films with 50 and 150 nm thicknesses were deposited on silicon substrates, using DC magnetron sputtering system, then post-annealed at different temperatures (200, 325, 450, 575 and 700°C) with flow oxygen at 200 sccm (standard Cubic centimeter per minute). The crystallographic structure of the films was obtained by means of x-ray diffraction (XRD) analysis. An atomic force micr...

متن کامل

Structural, Electrical and Optical Properties of Molybdenum Oxide Thin Films Prepared by Post-annealing of Mo Thin Films

Molybdenum thin films with 50 and 150 nm thicknesses were deposited on silicon substrates, using DC magnetron sputtering system, then post-annealed at different temperatures (200, 325, 450, 575 and 700°C) with flow oxygen at 200 sccm (standard Cubic centimeter per minute). The crystallographic structure of the films was obtained by means of x-ray diffraction (XRD) analysis. An atomic force micr...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2012