Semester Project Advanced NEMS Group CHARACTERIZATION OF MECHANICAL PROPERTIES OF MICRO/NANO BEAMS

نویسندگان

  • Soumya Yandrapalli
  • Guillermo Villanueva
  • Tom Larsen
چکیده

In this project, characterization of a series of previously fabricated Aluminium clamped-clamped micro beams and cantilevers by electrical measurements in order to investigate the effects of scaling down on mechanical properties of micro/nano structures is presented. The Young’s modulus that depends on the thickness of the microstructure, residual stress and surface properties as opposed to a constant Young’s modulus in macro scale theories was investigated. Due to insufficient sample space and high stresses during fabrication, a correlation was not obtained. KeywordsAluminium beams, Coupled Stress theory, Residual Stress theory, Surface Elasticity theory, Combined stress model, electrical characterization.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Study of Laminated Composite MEMS and NEMS Performance in Nano Metric Operations

Precision of nano-metric operations is an important issue in nano-engineering studies. Several operative parameters might affect the quality of results. The parameters of the nano world are significant but not entirely controllable. However, the geometrical and mechanical properties of micro cantilevers are completely controllable. So, controlling the sensitivity of resulting image through t la...

متن کامل

Nano-Scale Characterization of a Piezoelectric Polymer (Polyvinylidene Difluoride, PVDF)

The polymer polyvinylidene difluoride (PVDF) has unique piezoelectric properties favorable for Micro-Electro-Mechanical Systems (MEMS) and Nano-Electro-Mechanical Systems (NEMS) applications. In the present research, we conducted nanometer-length scale characterization of this material using several high-resolution techniques. Specifically, we used an atomic force microscope (AFM) to study the ...

متن کامل

Silicothermic production and characterization of FeSiNi/SiO2 Magnetic nanocompsite via mechanical alloying

In recent years, a lot of research has been done in the field of producing soft magnetic nano composites by means of mechanical alloying. These materials indicate more electrical resistance and permeability in comparison with soft magnetic composites (SMCs). In this research, reduction of silicothermal mixed powder (Nickel-oxide, Silicon and Iron) was carried out by mechanical alloying to form ...

متن کامل

The Structural and Mechanical Properties of Al-2.5%wt. B4C Met-al Matrix Nano-composite Fabricated by the Mechanical Alloying

In this study, aluminum (Al) matrix reinforced with micro-particles (30 µm) and nano-particles (50 nm) boron carbide (B4C) were used to prepare Al-2.5%wt., B4C nano-composite and micro-composite, respectively, using mechanical alloying method. The mixed powders were mechanically milled at 5, 10, 15 and 20 hrs. The XRD results indicated that the crystallite sizes of both the micro-composite and ...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2017