An IAEA multi-technique X-ray spectrometry endstation at Elettra Sincrotrone Trieste: benchmarking results and interdisciplinary applications.
نویسندگان
چکیده
The International Atomic Energy Agency (IAEA) jointly with the Elettra Sincrotrone Trieste (EST) operates a multipurpose X-ray spectrometry endstation at the X-ray Fluorescence beamline (10.1L). The facility has been available to external users since the beginning of 2015 through the peer-review process of EST. Using this collaboration framework, the IAEA supports and promotes synchrotron-radiation-based research and training activities for various research groups from the IAEA Member States, especially those who have limited previous experience and resources to access a synchrotron radiation facility. This paper aims to provide a broad overview about various analytical capabilities, intrinsic features and performance figures of the IAEA X-ray spectrometry endstation through the measured results. The IAEA-EST endstation works with monochromatic X-rays in the energy range 3.7-14 keV for the Elettra storage ring operating at 2.0 or 2.4 GeV electron energy. It offers a combination of different advanced analytical probes, e.g. X-ray reflectivity, X-ray absorption fine-structure measurements, grazing-incidence X-ray fluorescence measurements, using different excitation and detection geometries, and thereby supports a comprehensive characterization for different kinds of nanostructured and bulk materials.
منابع مشابه
Extreme ultraviolet resonant inelastic X-ray scattering (RIXS) at a seeded free-electron laser
In the past few years, we have been witnessing an increased interest for studying materials properties under non-equilibrium conditions. Several well established spectroscopies for experiments in the energy domain have been successfully adapted to the time domain with sub-picosecond time resolution. Here we show the realization of high resolution resonant inelastic X-ray scattering (RIXS) with ...
متن کاملStatus of the Fermi @ Elettra Photoinjector
The new FERMI@Elettra photoinjector is presently undergoing high-power testing and characterization at MAXlab in Lund, Sweden. This effort is a collaboration between Sincrotrone Trieste, MAX-lab and UCLA. The 1.6-cell RF gun cavity and the focusing solenoid were successfully designed and built by the Particle Beam Physics Laboratory at UCLA, delivered to Sincrotrone Trieste at the beginning of ...
متن کامل'Focused workshop on Region of Interest X-ray Computed Tomography' held on 17-20 November 2015 at Elettra (Trieste, Italy)
To satisfy the heterogeneous needs of X-ray CT users, flexible solutions are required both from the hardware and software point of view. The use of synchrotrons and microfocus X-ray sources present complementary approaches being characterized by different properties in terms of achievable spatial resolution, field of view and image contrast. The main aim of this event was to bring together expe...
متن کاملThe Fabre Project at Trieste
A program to design a high brilliance electron source suitable for a short wavelength Linac-based FEL is presented. The goal of the project is to develop a multicell integrated photoinjector capable of delivering 1 nC bunches with emittance below 1 mm mrad. This will be the first step toward a possible development of a IV generation light source test facility based on the existing Trieste Linac...
متن کاملFermi@elettra: 100 Nm - 10 Nm Single Pass Fel User Facility
The FERMI@ELETTRA project is an initiative from ELETTRA, INFM and other Italian institutes, to construct a single-pass FEL user-facility for the wavelength range from 100 nm (12 eV) to 10 nm (124 eV), to be located next to the third-generation synchrotron radiation facility ELETTRA in Trieste, Italy. The project is concentrated around the existing 1.2-GeV S-band linac, i.e., the injector for th...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
- Journal of synchrotron radiation
دوره 25 Pt 1 شماره
صفحات -
تاریخ انتشار 2018