The Identification of Models of External Loads
نویسنده
چکیده
One of the important problems of mathematical modelling of dynamic systems is the coincidence of modelling results with experimental measurements. Such a coincidence is being attained by construction of "correct" mathematical model (MM) of the dynamical system and the choice of a “good” model of external load (MEL). MM of object the motion of which coincides with experimental measurements with acceptable accuracy under action of MEL (or external impact) is understood by us as “correct” model. Thus the degree of "correctness" of MM depends directly on the chosen model of EL and required accuracy of the coincidence with experiment. It is formally possible to write as an inequality for models with the concentrated parameters the following:
منابع مشابه
Modeling Static Bruising in Apple Fruits: A Comparative Study, Part II: Finite Element Approach
ABSTRACT- Mechanical damage degrades fruit quality in the chain from production to the consumption. Damage is due to static, impact and vibration loads during processes such as harvesting, transportation, sorting and bulk storage. In the present study finite element (FE) models were used to simulate the process of static bruising for apple fruits by contact of the fruit with a hard surface. Thr...
متن کاملDynamic Response Analysis of Fractionally Damped Beams Subjected to External Loads using Homotopy Analysis Method
This paper examines the solution of a damped beam equation whose damping characteristics are well-defined by the fractional derivative (FD). Homotopy Analysis Method (HAM) is applied for calculating the dynamic response (DR). Unit step and unit impulse functions are deliberated for this analysis. Acquired results are illustrated to show the movement of the beam under various sets of parameters ...
متن کاملInvestigation of the Progressive Collapse Potential in Steel Buildings with Composite Floor System
Abnormal loads due to natural events, implementation errors and some other issues can lead to occurrence of progressive collapse in structures. Most of the past researches consist of 2- Dimensional (2D) models of steel frames without consideration of the floor system effects, which reduces the accuracy of the modeling. While employing a 3-Dimensional (3D) model and modeling the concrete slab sy...
متن کاملDynamic Modeling and Identification of The Hydro Turbine Using Field Test Data (Case Study: Abbaspour Power Plant)
In order to study the stability and fast dynamic of the power grid, modeling and identification of hydropower plant systems such as turbine, governor and excitation is required. Turbine is a mechanical device and usually identified through field tests. In this paper, the identification of the unit 8 of Abbaspour power plant is conducted. The linear and nonlinear model of the Francis turbine are...
متن کاملIdentification of models of external loads
In the given work the problem of construction (synthesis) of mathematical model of unknown or littleknown external load (EL) on open dynamic system is considered. Such synthesis is carried out by special processing of the experimentally measured response of dynamic system (method of identification). This problem is considered in two statements: the synthesis of EL for single model and the synth...
متن کاملPredictive models for evaluation of mesophilic and psychrophilic bacterial loads in muscles of fresh ice-stored silver pomfret by impediometric technique
Current microbial methodologies to determine fish quality are laborious and have long time required to obtain results. The impediometric technique as a rapid sensitive method was used to determine the correlation between impedance detection times (IDTs) and conventional reference psychrophilic and mesophilic plate counts of fish in order to develop models for predicting the microbial quality an...
متن کامل