Integrated planar Bragg grating oxygen sensor
نویسندگان
چکیده
We demonstrate an integrated planar Bragg grating sensor for the detection of oxygen by modification of the surface with a silica sol–gel containing immobilized methylene blue.
منابع مشابه
Interferometric integrated planar Bragg filter for all- optical single-sideband suppression
An integrated planar Bragg filter is proposed and experimentally demonstrated. X-couplers and Bragg gratings, operating as photonic Hilbert transformer and flat-top band gap reflectors, are incorporated. Optical signals reflected from these two gratings interference with each other are suitable for single sideband suppression. The device is fabricated by Direct UV grating writing technology in ...
متن کاملUV-Writing of a Superstructure Waveguide Bragg Grating in a Planar Polymer Substrate
We report on the fabrication of a superstructure Bragg grating in a planar polymer substrate. Based on a twofold illumination process an integrated waveguide and a superstructure Bragg grating are subsequently written into bulk polymethylmethacrylate by UV-induced refractive index modification. The measured reflected spectrum of the superstructure Bragg grating exhibits multiple reflection peak...
متن کاملDesign of a Rectangular Plate Optical Pressure Sensor Waveguide with Integrated Bragg Grating
This paper presents the design and simulation of a rectangular plate optical pressure sensor waveguide. The waveguide has a nano-scale Bragg grating introduced on the upper half area. The Bragg grating shows a considerable deformation, when it is subjected to tangential strain, which forms the basic sensing principal for the design. The free space wavelength of 1.55μm and Bragg spacing of 0.5μm...
متن کاملMEMS Bragg grating force sensor.
We present modeling, design, fabrication and characterization of a new type of all-optical frequency modulated MEMS force sensor based on a mechanically amplified double clamped waveguide beam structure with integrated Bragg grating. The sensor is ideally suited for force measurements in harsh environments and for remote and distributed sensing and has a measured sensitivity of -14 nm/N, which ...
متن کاملDesign Studies of Integrated Fabry-Perot Sensor Based on Bragg Grating Mirrors
In this work the results of the theoretical studies of photonic integrated circuit refractive index sensor based on quasi1D Bragg grating configurations which act as a Fabry-Perot interferometers are presented. The variation of the medium refractive index is detected by monitoring the shift of the spectral maxima of the Fabry-Perot cavity. The sensor has been designed using the analytical expre...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2010