Impact of pressure on plastic yield in amorphous solids with open structure.

نویسندگان

  • B Mantisi
  • G Kermouche
  • E Barthel
  • A Tanguy
چکیده

Plasticity in amorphous silica is unusual: The yield stress decreases with hydrostatic pressure, in contrast to the Mohr-Coulomb response commonly found in more compact materials such as bulk metallic glasses. To better understand this response, we have carried out molecular dynamics simulations of plastic response in a model glass with open structure. The simulations reproduce the anomalous dependence of yield stress with pressure and also correctly predict that the plastic response turns to normal once the material has been fully compacted. We also show that the overall shape of the yield surface is consistent with a quadratic behavior predicted assuming local buckling of the structure, a point of view that fits well into the present understanding of the deformation mechanisms of amorphous silica. The results also confirm that free volume is an adequate internal variable for a continuum scale description of the plastic response of amorphous silica. Finally, we also investigate the long-range correlations between rearrangement events. We find that strong intermittency is observed when the structure remains open, while compaction results in more homogeneous rearrangements. These findings are in agreement with recent results on the effect of compression on the middle range order in silicate glasses and also suggest that the well-known volume recovery of densified silica at relatively low temperatures is in fact a form of aging.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Connecting Local Yield Stresses with Plastic Activity in Amorphous Solids.

In model amorphous solids produced via differing quench protocols, a strong correlation is established between local yield stress measured by direct local probing of shear stress thresholds and the plastic rearrangements observed during remote loading in shear. This purely local measure shows a higher predictive power for identifying sites of plastic activity when compared with more conventiona...

متن کامل

Finite element analysis of elastic-plastic solids under Vickers indentation: surface deformation

Finite element modeling has been used to study the development of surface deformation during indentation with a Vickers indenter. A wide range of materials with different elastic modulus and yield stresses are examined. Results show that in a pyramidal indentation process, for a perfectly plastic material, sinking-in during loading can change to pile-up in unloading. This phenomenon depends on ...

متن کامل

Atomistic basis for the plastic yield criterion of metallic glass.

Because of their disordered atomic structure, amorphous metals (termed metallic glasses) have fundamentally different deformation mechanisms compared with polycrystalline metals. These different mechanisms give metallic glasses high strength, but the extent to which they affect other macroscopic deformation properties is uncertain. For example, the nature of the plastic-yield criterion is a poi...

متن کامل

Experimental Study of Masonry Structure Under Impact Loading and Comparing it with Numerical Modeling Results via Finite Element Model Updating

Given the sophisticated nature of the blast phenomenon in relation to structures, it is of significance to accurately investigate the structure behavior under blast loads. Due to its rapid and transient nature, blast loading is one of the most important dynamic loadings on the structures. Since masonry materials are widely used as the partition and bearing walls in the existing and newly-built ...

متن کامل

Physics of Amorphous Solids: their Creation and their Mechanical Properties

In this short review I summarize some progress achieved in my research group regarding the glass transition and the mechanical properties of the resulting amorphous solids. Our main concerns were on the one hand to understand the extreme slowing down over a narrow range of temperatures which results in a viscosity so high that the materials behave as solids under small mechanical strains. On th...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:
  • Physical review. E

دوره 93 3  شماره 

صفحات  -

تاریخ انتشار 2016