Atmospheric emission of polychlorinated naphthalenes from iron ore sintering processes.

نویسندگان

  • Guorui Liu
  • Minghui Zheng
  • Bing Du
  • Zhiqiang Nie
  • Bing Zhang
  • Wenbin Liu
  • Cheng Li
  • Jicheng Hu
چکیده

Iron ore sintering processes constitute significant sources of dioxins, and studies have confirmed a close correlation between polychlorinated naphthalenes (PCNs) and dioxin formation. Thus, iron ore sintering processes are thought to be a potential source of PCNs, although intensive investigations on PCN emissions from sintering processes have not been carried out. Therefore, the aim of the present study was to qualify and quantify PCN emissions from nine sintering plants operating on different industrial scales. PCN concentrations ranged from 3 to 983 ng m(-3) (0.4-23.3 pg TEQ(PCN) m(-3)) and emission factors ranged from 14 to 1749 μg t(-1) (0.5-41.5 ng TEQ(PCN) t(-1)), with a geometric mean of 84 μg t(-1) (2.1 ng TEQ(PCN) t(-1)). The estimated annual emission of PCNs from sintering processes in China was 1390 mg TEQ(PCN). These figures will assist in the development of a PCN emissions inventory. Regarding emission characteristics, PCNs mainly comprised low-chlorinated homologs. The ratios of several characteristic PCN congeners were also measured and compared with those from other sources. Taken together, these results may provide useful information for identifying the sources of PCNs produced by iron ore sintering processes.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Removal of polychlorinated naphthalenes by desulfurization and emissions of polychlorinated naphthalenes from sintering plant

The sintering flue gas samples were collected at the inlets and outlets of the desulfurization systems to evaluate the influence of the systems on PCNs emission concentrations, profiles, and emission factors. The PCNs concentrations at the inlets and outlets were 27888-153672 pg m(-3) and 11988-42245 pg m(-3),respectively. Desulfurization systems showed excellent removal for PCNs, and the remov...

متن کامل

Atmospheric Emission of Polybrominated Dibenzo-p-dioxins and Dibenzofurans from Converter Steelmaking Processes

Polybrominated dibenzo-p-dioxins and dibenzofurans (PBDD/Fs) and polybrominated diphenyl ethers (PBDEs) were characterized and quantified in stack gas from secondary ventilation systems from five different steelmaking plants. The concentrations of 2,3,7,8-substituted PBDD/Fs (2,3,7,8-PBDD/Fs) and PBDEs were 0.036–0.19 ng/Nm (0.32–4.33 pg toxic equivalency (TEQ)/Nm) and 3.11–40.0 ng/Nm, respecti...

متن کامل

Factors influencing polychlorinated dibenzo-p-dioxin and polychlorinated dibenzofuran (PCDD/F) emissions and control in major industrial sectors: case evidence from Shandong Province, China.

Analyzing determinants that influence polychlorinated dibenzo-p-dioxin and polychlorinated dibenzofuran (PCDD/F) emissions is helpful for decision-makers to find effective and efficient ways to mitigate PCDD/F emissions. The PCDD/F emissions and the contributions of the scale effect, structure effect and technology effect to emissions from eight main industrial sectors in 2006, 2008 and 2010 in...

متن کامل

Identifying iron foundries as a new source of unintentional polychlorinated naphthalenes and characterizing their emission profiles.

Iron foundries have been identified as dioxin sources in previous field investigations. Similar formation mechanisms between dioxins and unintentional polychlorinated naphthalenes (PCNs) have led us to speculate that iron foundries are also potential PCN sources. In this study, PCNs in stack gas and fly ash samples representing atmospheric and residue emissions from 13 typical iron foundry plan...

متن کامل

Modeling and Simulation of Processes from an Iron Ore Sintering Plant

This work presents the mathematic models of the basic processes from an iron ore processing plant. Based on the mathematic models, using the Matlab/Simulink platform, it was achieved the simulation of the dosing process and simulation of the sintering process. The achieved mathematic model allows the determination of the material flows in the charge at their chemical composition variation, or a...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:
  • Chemosphere

دوره 89 4  شماره 

صفحات  -

تاریخ انتشار 2012