A Hybrid Audio ΔΣ Modulator with dB - Linear Gain Control Function

© 2011 Yi-Gyeong Kim et al. 897 A hybrid ΔΣ modulator for audio applications is presented in this paper. The pulse generator for digital-toanalog converter alleviates the requirement of the external clock jitter and calibrates the coefficient variation due to a process shift and temperature changes. The input resistor network in the first integrator offers a gain control function in a dB-linear fashion. Also, careful chopper stabilization implementation using return-to-zero scheme in the first continuous-time integrator minimizes both the influence of flicker noise and inflow noise due to chopping. The chip is implemented in a 0.13 μm CMOS technology (I/O devices) and occupies an active area of 0.37 mm. The ΔΣ modulator achieves a dynamic range (A-weighted) of 97.8 dB and a peak signal-to-noise-plus-distortion ratio of 90.0 dB over an audio bandwidth of 20 kHz with a 4.4 mW power consumption from 3.3 V. Also, the gain of the modulator is controlled from –9.5 dB to 8.5 dB, and the performance of the modulator is maintained up to 5 nsRMS external clock jitter.