Enhancement of electroluminescence in zirconium poly carboxylic acid-based light emitting diodes by bathophenanthroline ligand.

نویسندگان

  • Hashem Shahroosvand
  • Fahimeh Nasouti
  • Ahmad Sousaraei
  • Ezeddin Mohajerani
  • Amir Khabbazi
چکیده

The reactions of a zirconium salt with 1,2,4,5-benzenetetracarboxylate (btec), bathophenanthroline (Bphen) and thiocyanate ions were synthesized and studied by changing the mole ratio, the order of reactant and their pH. It is found that the coordination mode of btec acid depends on the control of reaction conditions. Monodentate, bidentate and bridging modes were investigated by FT-IR spectroscopy. The structures of Zr(btec) and Zr(btec)(Bphen) complexes were also characterized by UV-Vis, CHN, ICP-AES, (1)H NMR and cyclic voltammetry. The role of Bphen ligand in the photopysical properties of Zr(btec)(Bphen) complexes was investigated by DFT calculation. The photoluminescence (PL) emission of nine Zr(btec) complexes that have two peaks, a sharp and intense band for the first peak from 320 to 430 nm in comparison to the second peak with a less intensity and broadened in the regions of 650-780 nm. PL spectra of twelve Zr(btec)(Bphen) complexes also showed bands at 450, 550, 625 nm. LED devices with Zr complex as emitter layer and the structure ITO/PEDOT:PSS/PVK:PBD/zirconium complex/Al emitted a broad band centered at 550 and 650 originating from the Zr complexes. The EL spectra of Zr(btec) and Zr(btec)(Bphen) complexes indicated a long red shift rather than PVK:PBD blend. We believe that the electroplex occurring at PVK-Zr complexes interface is responsible for the green-red emission in the EL of the device. These observations suggest an important role for the Bphen ligand to improve EL performance.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Thin-film Encapsulation of Organic Light-Emitting Diodes Using Single and Multilayer Structures of MgF2, YF3 and ZnS

In this research, the lifetime of green organic light emitting diodes (OLEDs) is studied using four passivation layers. To encapsulate the OLEDs, MgF2, YF3, composed of alternating MgF2/ZnS and YF3/ZnS layers were grown by thermal vacuum deposition. Measurements show that the device lifetime is significantly improved by using YF3 and ZnS as passivation layers. However, diodes encapsulated by Mg...

متن کامل

Degradation mechanism beyond device self-heating in high power light-emitting diodes

Related Articles Temperature-dependence of the internal efficiency droop in GaN-based diodes Appl. Phys. Lett. 99, 181127 (2011) Localized surface plasmon-enhanced electroluminescence from ZnO-based heterojunction light-emitting diodes Appl. Phys. Lett. 99, 181116 (2011) Performance enhancement of blue light-emitting diodes with AlGaN barriers and a special designed electronblocking layer J. Ap...

متن کامل

Enhanced emission from Si-based light-emitting diodes using surface plasmons

Excitation of surface plasmons on metallic nanoparticles has potential for increasing the absorption and emission from thin Si devices. We report an eight-fold enhancement in electroluminescence from silicon-on-insulator light-emitting diodes at 900 nm via excitation of surface plasmon resonance in silver nanoparticles, along with a redshift in the electroluminescence by 70 nm by overcoating th...

متن کامل

Electroluminescence of Conjugated Aromatic Polymers in Organic Light Emitting Diodes

Organic electroluminescent materials have been the subject of intense research for use in light emitting diodes (LEDs). When compared with liquid crystal displays (LCDs), organic light emitting diodes (OLEDs) require lower energy input, have a wider viewing angle with improved color contrast, and can be made much thinner. The electroluminescence (EL) of organic compounds was first demonstrated ...

متن کامل

GaAs pillar array-based light emitting diodes fabricated by metal-assisted chemical etching

We demonstrate GaAs pillar array-based light emitting diodes (LEDs) with axial p-in junctions fabricated using a room-temperature metal-assisted chemical etching (MacEtch) method. Variations in vertical etch rates for all three doping types of GaAs are investigated as a function of etching temperature, oxidant/acid concentration ratio, and dilution of the etching solution. Control over nanopill...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:
  • Physical chemistry chemical physics : PCCP

دوره 15 24  شماره 

صفحات  -

تاریخ انتشار 2013