RFC 4717 Encapsulation for ATM over MPLS December

نویسندگان

  • L. Martini
  • J. Jayakumar
  • M. Bocci
چکیده

Status of This Memo This document specifies an Internet standards track protocol for the Internet community, and requests discussion and suggestions for improvements. Please refer to the current edition of the "Internet Official Protocol Standards" (STD 1) for the standardization state and status of this protocol. Distribution of this memo is unlimited. Abstract An Asynchronous Transfer Mode (ATM) Pseudowire (PW) is used to carry ATM cells over an MPLS network. This enables service providers to offer "emulated" ATM services over existing MPLS networks. This document specifies methods for the encapsulation of ATM cells within a pseudowire. It also specifies the procedures for using a PW to provide an ATM service.

برای دانلود رایگان متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Encapsulation of MPLS over Layer 2 Tunneling Protocol Version 3

The Layer 2 Tunneling Protocol, Version 3 (L2TPv3) defines a protocol for tunneling a variety of payload types over IP networks. This document defines how to carry an MPLS label stack and its payload over the L2TPv3 data encapsulation. This enables an application that traditionally requires an MPLS-enabled core network, to utilize an L2TPv3 encapsulation over an IP network instead. Townsley, et...

متن کامل

Encapsulating MPLS in IP or Generic Routing Encapsulation (GRE)

Various applications of MPLS make use of label stacks with multiple entries. In some cases, it is possible to replace the top label of the stack with an IP-based encapsulation, thereby enabling the application to run over networks that do not have MPLS enabled in their core routers. This document specifies two IP-based encapsulations: MPLS-in-IP and MPLS-in-GRE (Generic Routing Encapsulation). ...

متن کامل

RFC 4817 MPLS over L 2 TPv 3 March

The Layer 2 Tunneling Protocol, Version 3 (L2TPv3) defines a protocol for tunneling a variety of payload types over IP networks. This document defines how to carry an MPLS label stack and its payload over the L2TPv3 data encapsulation. This enables an application that traditionally requires an MPLS-enabled core network, to utilize an L2TPv3 encapsulation over an IP network instead. Townsley, et...

متن کامل

Encapsulation Methods for Transport of PPP/High-Level Data Link Control (HDLC) over MPLS Networks

A pseudowire (PW) can be used to carry Point to Point Protocol (PPP) or High-Level Data Link Control (HDLC) Protocol Data Units over a Multiprotocol Label Switching (MPLS) network without terminating the PPP/HDLC protocol. This enables service providers to offer "emulated" HDLC, or PPP link services over existing MPLS networks. This document specifies the encapsulation of PPP/HDLC Packet Data U...

متن کامل

Packet Pseudowire Encapsulation over an MPLS PSN

This document describes a pseudowire mechanism that is used to transport a packet service over an MPLS PSN in the case where the client Label Switching Router (LSR) and the server Provider Edge equipments are co-resident in the same equipment. This pseudowire mechanism may be used to carry all of the required layer 2 and layer 3 protocols between the pair of client LSRs.

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2005