Analysis and Design of 6-dof 6-prrs Parallel Manipulators
نویسندگان
چکیده
In this thesis, the class of parallel manipulators with six kinematic chains of type PRRS is analyzed. In this class, six linear actuators attached to the base control the six degrees of freedom of the mobile platform of the parallel manipulator. Six legs of constant length connect the mobile platform to the linear actuators through respectively spherical and universal
منابع مشابه
Design and Kinematic Analysis of a 4-DOF Serial-Parallel Manipulator for a Driving Simulator
This paper presents the kinematic analysis and the development of a 4-degree-of-freedom serial-parallel mechanism for large commercial vehicle driving simulators. The degrees of freedom are selected according to the target maneuvers and the structure of human motion perception organs. Several kinematic properties of parallel part of the mechanism under study are investigated, including the inve...
متن کامل19 A Novel 4 - DOF Parallel Manipulator H 4
Parallel manipulators have the advantages of high stiffness and low inertia compared to serial mechanisms. Based on the Steward-Gough platform architecture, a lot of 6-DOF mechanical devices have been proposed. The 6-DOF parallel manipulators suffer from a small workspace, complex mechanical design, and difficult motion generation and control due to their complex kinematic analysis. To overcome...
متن کاملTrajectory Optimization of Cable Parallel Manipulators in Point-to-Point Motion
Planning robot trajectory is a complex task that plays a significant role in design and application of robots in task space. The problem is formulated as a trajectory optimization problem which is fundamentally a constrained nonlinear optimization problem. Open-loop optimal control method is proposed as an approach for trajectory optimization of cable parallel manipulator for a given two-end-po...
متن کاملStructure Synthesis of 6-DOF 3-3 Decoupled Parallel Manipulators
In parallel manipulator design, usual 6-DOF PMs, like the Stewart platform, suffer from the disadvantages of difficult forward kinematics, coupled motion, and small workspace, so that the motion planing and control become very complicated and difficult to be implemented in real application. Most of the PMs with lower mobility are over-constrained when assembly errors are considered [1]. Therefo...
متن کاملMechanism Design for 3-, 4-, 5- and 6-DOF PMWPSs
Mechanism innovation design is an important topic in the field of robot. Many kinds of limbs with specific degrees of freedom (DOFs) are proposed, in which a new joint, P-joint is introduced. In order to obtain new mechanisms of parallel manipulators (PMs), a principle for mechanism design of PMs is adopted, which is based on the special Plücker coordinates for describing a limb. By the princip...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2012