Experimental Modal Analysis and Model Validation of Antenna Structures
نویسندگان
چکیده
Numerical design optimization is a powerful tool that can be used by engineers during any stage of the design process. There are many different applications for structural optimization. A specific application that will be discussed in the following paper is experimental data matching. Data obtained through tests on a physical structure will be matched with data from a numerical model of that same structure. The data of interest will be the dynamic characteristics of an antenna structure focusing on the mode shapes and modal frequencies. The structure used was a scaled and simplified model of the Karoo Array Telescope-7 (KAT-7) antenna structure. This kind of data matching is a complex and difficult task. This paper discusses how optimization can assist an engineer during the process of correlating a finite element model with vibration test data. Keywords—Finite Element Model (FEM), Karoo Array Telescope (KAT-7), modal frequencies, mode shapes, optimization, shape optimization, size optimization, vibration tests
منابع مشابه
Damage identification of structures using experimental modal analysis and continuous wavelet transform
Abstract: Modal analysis is a powerful technique for understanding the behavior and performance of structures. Modal analysis can be conducted via artificial excitation, e.g. shaker or instrument hammer excitation. Input force and output responses are measured. That is normally referred to as experimental modal analysis (EMA). EMA consists of three steps: data acquisition, system identificatio...
متن کاملFEM Updating for Offshore Jacket Structures Using Measured Incomplete Modal Data
Marine industry requires continued development of new technologies in order to produce oil. An essential requirement in design is to be able to compare experimental data from prototype structures with predicted information from a corresponding analytical finite element model. In this study, structural model updating may be defined as the fit of an existing analytical model in the light of measu...
متن کاملA Comparison Study on Various Finite Element Models of Riveted Lap Joint by the Use of Dynamic Model Updating
Till now, various models have been proposed in literature to simulate the behavior of riveted structures. In order to find the most accurate analytical method in modeling the dynamic behavior of riveted structures, a comparison study is performed on several of these models, in this research. For this purpose, experimental modal analysis tests are conducted on a riveted plate to verify the effic...
متن کاملModal analysis of a turbo-pump shaft: An innovative suspending method to improve the results
Modal parameter extraction of high speed shafts is of critical importance in mechanical design of turbo-pumps. Due to the complex geometry and peripheral components of turbo-pumps, difficulties can arise in determination of modal parameters. In this study, modal properties of a turbo-pump shaft, was studied by experimental modal analysis, and using different excitation techniques. An innovative...
متن کاملUpdating finite element model using frequency domain decomposition method and bees algorithm
The following study deals with the updating the finite element model of structures using the operational modal analysis. The updating process uses an evolutionary optimization algorithm, namely bees algorithm which applies instinctive behavior of honeybees for finding food sources. To determine the uncertain updated parameters such as geometry and material properties of the structure, local and...
متن کامل