Characterization of Scanner Sensitivity
نویسندگان
چکیده
Color scanners are becoming quite popular as input devices for desktop publishing. In many applications it is desirable to obtain calibrated color from them. In order to properly calibrate the device for a variety of illuminants, it is necessary to estimate the spectral sensitivity of the scanner. This paper describes a set theoretic approach to this problem. This method is shown to have increased accuracy compared to present methods.
منابع مشابه
Set theoretic estimation in color scanner characterization
A set theoretic approach for the spectral characterization of a color scanner is described. These devices usually employ three channels to obtain a device dependent RGB (red, green, blue) image. To display/print an image, the device dependent RGB values must be correctly transformed to the color space of the target device. To determine accurate and efficient transformations for a number of devi...
متن کاملValidation and evaluation of a GATE model for MAMMI PET scanner
Introduction:MAMMI is a dedicated PET based on high resolution detectors placed close to the breast. In this study, we presented a GATE model for the simulation of MAMMI scanner and model its performance of the MAMMI based on an adaptation of the NU 4-2008 NEMA standard. Methods:A detailed of geometry MAMMI system that uses scintillation crystals coupled...
متن کاملPerformance comparison of four commercial GE discovery PET/CT scanners: A monte carlo study using GATE
Combined PET/CT scanners now play a major role in medicine for in vivo imaging in oncology, cardiology, neurology, and psychiatry. As the performance of a scanner depends not only on the scintillating material but also on the scanner design, with regards to the advent of newer scanners, there is a need to optimize acquisition protocols as well as to compare scanner ...
متن کاملThe perceptibility curve test applied to CCD and two methods of digitization of dental film-based radiographs
Objectives: Several methods of image acquisition are accessible in dentistry. There is no overall acceptable method for image digitization so all different types of images can be comparable. The objective of this study was to compare the diagnostic accuracy of different methods of image digitization. Methods: This accuracy diagnostic test study used perceptibility curve test which first intr...
متن کاملDesign and performance evaluation of spheroid geometry for brain PET scanner using Monte Carlo modeling
Introduction: There has been a curiosity about the spheroid geometry for PET scanners developments since several years ago, therefore in this study, we are aiming to evaluate the performance of this geometry and compare its performance with cylindrical geometry using Monte Carlo simulation. Methods: We simulated a spheroid geometry with a radius of 199 mm...
متن کامل