A new approach to control single-link flexible arms

Control of Flexible Link Robot using a Closed Loop Input-Shaping Approach

This paper is has addressed the Single Flexible Link Robot. The dynamical model is derived using Euler-Lagrange equation and then a proper controller is designed to suppress a  vibration based-on Input-Shaping (IS) method. But, IS control method is an open loop strategy. Due to the weakness of open loop control systems, a closed loop IS control system is proposed. The achieved closed loop c...

Modeling Flexibility Effects in Robotic Arms Via the Modified 4x4 D-H Homogeneous Transformation

This paper presents a method for the kinematical modeling of robot manipulator arms with flexible members. Development of such techniques are important for the improvement of robotic arms precision performance and their mechanical design. The approach employs the (4X4) Denavit-Hartenberg homogeneous transformations to describe the kinematics of light weight flexible manipulator arms. The method...

Nonlinear Stabilizing Controller for a Special Class of Single Link Flexible Joint Robots

Joint flexibility is a very important factor to consider in the controller design for robot manipulators if high performance is expected. Most of the research works on control of flexible-joint robots in literature have ignored the actuator dynamics to avoid complexity in controller design. The problem of designing nonlinear controller for a class of single-link flexible-joint robot manipulator...

A NEW APPROACH TO CONTROL SINGLE - LINK FLEXIBLE ARMS . PART IIk Adaptive Control of the Tip Position with Payload Changes

Dynamic Load Carrying Capacity of Mobile-Base Flexible-Link Manipulators: Feedback Linearization Control Approach

This paper focuses on the effects of closed- control on the calculation of the dynamic load carrying capacity (DLCC) for mobile-base flexible-link manipulators. In previously proposed methods in the literature of DLCC calculation in flexible robots, an open-loop control scheme is assumed, whereas in reality, robot control is achieved via closed loop approaches which could render the calculated ...

Function Approximation Approach for Robust Adaptive Control of Flexible joint Robots

This paper is concerned with the problem of designing a robust adaptive controller for flexible joint robots (FJR). Under the assumption of weak joint elasticity, FJR is firstly modeled and converted into singular perturbation form. The control law consists of a FAT-based adaptive control strategy and a simple correction term. The first term of the controller is used to stability of the slow dy...