Fault Detection and Diagnosis of Induction Motors Based on Higher-Order Spectrum

نویسنده

  • Juggrapong Treetrong
چکیده

The number of research studies have shown that the fault in the stator or rotor generally show sideband frequencies around the mains frequency (50Hz) and it higher harmonics in the spectrum of the Motor Current Signature Analysis (MCSA). However in the present experimental studies such observations have not seen, but any fault either in the stator or the rotor may distort the sinusoidal response of the motor RPM and the main frequency so the MCSA response may contain number of harmonics of the motor RPM and the mains frequency. Hence the use of the higher order spectrum (HOS), namely the bisepctrum of the MCSA has been proposed here. Additionally, the bispectra with the unwrapped phase angle along its frequency has been applied to analyze motor faults. Thus, this paper proposes bispectrum relates both amplitude and phase of a signal. It has been observed that it not only detects the early fault but also indicate the severity of the fault to some extent.

برای دانلود رایگان متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Neural-Network-Aided On-line Diagnosis of Broken Bars inInduction Motors

This paper presents a method based on neural networks to detect broken rotor bars and end rings in squirrel cage induction motors. In the first part, detection methods are reviewed and traditional methods of fault detection as well as dynamic model of induction motors are introduced using the winding function method. In this method, all stator and rotor bars are considered independently in ord...

متن کامل

Neural-Network-Aided On-line Diagnosis of Broken Bars inInduction Motors

This paper presents a method based on neural networks to detect broken rotor bars and end rings in squirrel cage induction motors. In the first part, detection methods are reviewed and traditional methods of fault detection as well as dynamic&#10model of induction motors are introduced using the winding function method. In this method, all stator and rotor bars are considered independently in o...

متن کامل

A Review of Application of Signal Processing Techniques for Fault Diagnosis of Induction Motors – Part I

Abstract - Use of efficient signal processing tools (SPTs) to extract proper indices for fault detection in induction motors (IMs) is the essential part of any fault recognition procedure. The Part1 of the two parts paper focuses on Fourier-based techniques including fast Fourier transform and short time Fourier transform. In this paper, all utilized SPTs which have been employed for fault fete...

متن کامل

Application of Signal Processing Tools for Fault Diagnosis in Induction Motors-A Review-Part II

The use of efficient signal processing tools (SPTs) to extract proper indices for the fault detection in induction motors (IMs) is the essential part of any fault recognition procedure. The 2nd part of this two-part paper is, in turn, divided into two parts. Part two covers the signal processing techniques which can be applied to non-stationary conditions. In this paper, all utilized SPTs for n...

متن کامل

Exact Modeling and Simulation of Saturated Induction Motors with Broken Rotor Bars Fault using Winding Function Approach

Winding function method (WFM) provides a detailed and rather simple analytical modeling and simulation technique for analyzing performance of faulty squirrel-cage induction motors (SCIMs). Such analysis is mainly applicable for designing on-line fault diagnosis techniques. In this paper, WFM is extended to include variable degree of magnetic saturation by applying an appropriate air gap functio...

متن کامل

Design of an Active Approach for Detection, Estimation and Short-Circuit Stator Fault Tolerant Control in Induction Motors

Three phase induction motors have many applications in industries. Consequently, detecting and estimating the fault and compensate it in a way that the faulty induction motor satisfies the predefined goals are important issues. One of the most common faults in induction motors is the short circuit of the stator winding. In this paper, an active fault-tolerant control system is designed and pres...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2009