Design and Machining Control via Interoperable Function Blocks and STEP-NC Data Model
نویسنده
چکیده
This paper discussed about proposes an architecture and implementation of a controller via Function Block Development Kit (FBDK). It can be used to create an open CNC architecture on ISO 14649 and Function Block (IEC 61499). This offers interoperability, portability, and adaptability. The system framework consists of three main components: (1) STEP-NC Parser, (2) Tool Path Simulator, and (3) Communication. In order to optimise, the controller should incorporate with various technologies related to intelligent, such as kernel software, open communication port and open hardware design. The system has been implemented in CNC controller on an actual table 3-axis milling machine. It will simplify the design of a CNC machine controller with the architecture layers responsible for data processing, data storage and execution. This research also highlighted the requirements for global interoperable manufacturing for real-life machining system with the architecture layers responsible for data processing, data storage, execution and feedback. Key-Words: Interoperable, CNC controller, Function Block(FB) , STEP-NC
منابع مشابه
A Review of Intelligent Cnc Controller Development Based on Step-nc
In the contemporary Computer Numeric Controlled (CNC) machine tools of Computer Aided Manufacturing (CAM) and CNC process conducted by a number of inter-related operations and parameters using G Codes and M codes set as RS274 or ISO 6983 standard. However, this programming language does not explicitly relate to each other to have control of arbitrary locations other than the motion of the block...
متن کاملDevelopment of a Cnc Router Adherent to Standard Step- Nc Based on the Controller Advanced Machine (emc2)
This paper describes the development and validation of a computer numerical controller architecture adherent to the standard STEP-NC Part-11 that is associated with the milling process. The STEP-NC controller development is based on the open source driver EMC (Enhanced Machine Controller or LinuxCNC) adherent to the standard RS-274 that originally works with the NC program using codes G/M (G-co...
متن کاملISO 14649 (STEP-NC): New Standards for CNC Machining
The changing economic climate has made global manufacturing a growing reality over the last decade, forcing companies from east and west and all over the world to collaborate beyond geographic boundaries in the design, manufacture and assemble of products. The ISO10303 and ISO14649 Standards (STEP and STEP-NC) have been developed to introduce interoperability into manufacturing enterprises so a...
متن کاملISO 14649-based nonlinear process planning implementation for complex machining
Increasing attention is being paid to complete machining, i.e., machining of the whole part in a single machine tool, in the metal working industry. For this purpose, complex machine tools equipped with machining components, such as multiple spindles and turrets have been developed by leading machine tool builders. The efficiency of complex machine tools is largely dependent on how the machinin...
متن کاملA Feature-based Machining System using STEP
Discrete part manufacturing flows from a design phase in which product information is defined to a manufacturing phase in which the processes for machined parts and tooling are planned and executed. Process planning typically culminates with the generation of numerical control (NC) programs for specific equipment, such as machining centers or turning centers. These NC programs are written in th...
متن کامل