The C 2 Heat - Kernel Coefficient in the Presence of Boundary Discontinuities
نویسندگان
چکیده
We consider the heat-kernel on a manifold whose boundary is piecewise smooth. The set of independent geometrical quantities required to construct an expression for the contribution of the boundary discontinuities to the C 2 heat-kernel coefficient is derived in the case of a scalar field with Dirichlet and Robin boundary conditions. The coefficient is then determined using conformal symmetry and evaluation on some specific manifolds. For the Robin case a perturbation technique is also developed and employed. The contributions to the smeared heat-kernel coefficient and cocycle function are calculated. Some incomplete results for spinor fields with mixed conditions are also presented.
منابع مشابه
Boundary layer Viscous Flow of Nanofluids and Heat Transfer Over a Nonlinearly Isothermal Stretching Sheet in the Presence of Heat Generation/Absorption and Slip Boundary Conditions
The steady two-dimensional flow of a viscous nanofluid of magnetohydrodynamic (MHD) flow and heattransfer characteristics for the boundary layer flow over a nonlinear stretching sheet is considered. Theflow is caused by a nonlinear stretching sheet with effects of velocity, temperature and concentrationslips. Problem formulation is developed in the pre...
متن کاملInfluence of Non-Uniform Wall Temperature on Local Heat Transfer Coefficient in a Rotating Square Channel
Abstract: This paper presents the results of an experimental examination of the effect of non-uniform wall temperature on local heat transfer coefficient in a rotating smooth-walled square channel. Three different thermal boundary situations were investigated: (a) even and odd (four) wall uniform temperature, (b) even and odd (four) wall uniform heat flux, and (c) even (leading and trailing) w...
متن کاملThe Effect of Square Splittered and Unsplittered Rods in Flat Plate Heat Transfer Enhancement
A square splittered and unsplittered rod is placed in a turbulent boundary layer developed over a flat plate. The effect of the resulting disturbances on the local heat transfer coefficient is then studied. In both cases the square rod modifies the flow structure inside the boundary layer. As a result, a stagnation point, a jet and wake area are generated around the square rod, each making a co...
متن کاملX iv : h ep - t h / 98 06 16 8 v 1 1 9 Ju n 19 98 The a 3 / 2 heat kernel coefficient for oblique boundary conditions
We present a method for the calculation of the a3/2 heat kernel coefficient of the heat operator trace for a partial differential operator of Laplace type on a compact Riemannian manifold with oblique boundary conditions. Using special case evaluations, restrictions are put on the general form of the coefficients, which, supplemented by conformal transformation techniques, allows the entire sme...
متن کاملApplication of Single Objective Genetic Algorithm to Optimize Heat Transfer Enhancement from a Flat Plate
The optimal shape of a two dimensional turbulator above an isothermal flat plate is found by using numerical simulation. The turbulent boundary layer over the flat plate was disrupted at various situations by inserting a quadrilateral bar where the boundary layer thickness kept more than three times greater than the insert\'s height. As a result, the overall heat transfer coefficient of the wal...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 1998