Ordered Nanoporous Carbon Structures Synthesized Using Large-pore Mesoporous Silica Templates

نویسندگان

  • Ryong RYOO
  • Tae-Wan KIM
  • Minkee CHOI
چکیده

Poly(alkylene oxide)-type block copolymers have been recently shown to be particularly versatile as structure-directing agents for the preparation of ordered large-pore mesoporous silica materials. In principle, the structure direction is achieved through the formation of periodic supramolecular self-assemblies between the polymeric surfactants and a silica source in the aqueous solution. The organic polymers in the periodic nanocomposite materials are easily removed by calcination in air or extraction with solvents, to produce large-pore mesoporous silicas. Exceptional control of the phase behavior has been achieved using the triblock copolymers with butanol at low acid concentrations. This allows the phase control with various structures such as twodimensional hexagonal (2D-hex) p6mm (honeycomb-like structure, known as SBA-15), cubic Im3m (bcc packing of spherical nanopores), cubic Fm3m (fcc packing of nanopores) and cubic Ia3d (gyroid structure with bicontinuous mesoporosity) [1-4]. The pore topology and pore connectivity can be tailored as a function of the copolymer concentration, synthesis temperature, or volume fraction of the different copolymer blocks. The pore diameters are tunable, typically, in the range of 5 – 15 nm. Extensive researches on such structural and textural control have been recently reported, aiming at the design of functional nanoporous solids with various structures. Most notably, such mesoporous silicas turned out to be versatile templates for the synthesis of carbon materials with highly ordered nanoporous architectures. In the present work, ordered mesoporous carbons with various structures have been obtained via the template-directed synthesis route using large-pore mesoporous silicas. The various nanoporous structures of the carbons correspond to the faithful replication of the silica templates. Here, we present our recent progresses related to the synthesis and characterization of ordered mesoporous carbons using the large-pore ordered mesoporous silicas as templates.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Highly Mesoporous Carbons Obtained Using a Dynamic Template Method

New nanoporous carbons with extremely high mesopore volumes and surface areas were obtained using mesoporous silica with a 3-D wormhole porous framework as templates. Mesoporous silica was synthesized following the literature described methods. Polystyrene sulfonic acid-based organic salts were used as carbon precursors. To evaluate the effect of sodium on porosity development silica matrices w...

متن کامل

Triconstituent co-assembly to ordered mesostructured polymer-silica and carbon-silica nanocomposites and large-pore mesoporous carbons with high surface areas.

Highly ordered mesoporous polymer-silica and carbon-silica nanocomposites with interpenetrating networks have been successfully synthesized by the evaporation-induced triconstituent co-assembly method, wherein soluble resol polymer is used as an organic precursor, prehydrolyzed TEOS is used as an inorganic precursor, and triblock copolymer F127 is used as a template. It is proposed for the firs...

متن کامل

Synthesis of Ethylenediamine-modified Ordered Mesoporous Carbon as a New Nanoporous Adsorbent for Removal of Cu(II) and Pb(II) Ions from Aqueous Media

The mesoporous carbon (CMK-3) functionalized with ethylenediamine (EDA) has been synthesized (CMK-3-EDA) and applied as a new mesoporous adsorbent for removal of Cu(II) and Pb(II) cations from aqueous solutions. Nitrogen adsorption–desorption measurements (BET) show that surface area, pore size and pore volume of CMK-3 were significantly changed after amine modification. The BET surface area an...

متن کامل

Synthesis of thermally stable mesoporous cerium oxide with nanocrystalline frameworks using mesoporous silica templates.

Highly ordered mesoporous cerium oxides, composed of nanocrystalline pore walls and exhibiting high thermal stability even at 973 K, were synthesized using mesoporous silica templates with hexagonal p6mm and cubic Ia3d symmetries.

متن کامل

Synthesis of Metastable Au-Fe Alloy Using Ordered Nanoporous Silica as a Hard Template

Nanoporous Au-Fe alloy was synthesized via a wet chemistry route using ordered nanoporous silica as a hard template. The nanoporous Au-Fe consisted of aligned arrays of nanopores that were uniform in composition and ordered in hexagonal lattice, whereas Au-Fe nanoparticles synthesized without templates exhibited broad dispersions in the chemical composition and/or particle size. Nanoporous Au-F...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2004