Kinematics estimation of straddled movements on high bar from a limited number of skin markers using a chain model.
نویسندگان
چکیده
To reduce the effects of skin movement artefacts and apparent joint dislocations in the kinematics of whole body movement derived from marker locations, global optimisation procedures with a chain model have been developed. These procedures can also be used to reduce the number of markers when self-occlusions are hard to avoid. This paper assesses the kinematics precision of three marker sets: 16, 11 and 7 markers, for movements on high bar with straddled piked posture. A three-dimensional person-specific chain model was defined with 9 parameters and 12 degrees of freedom and an iterative procedure optimised the gymnast posture for each frame of the three marker sets. The time histories of joint angles obtained from the reduced marker sets were compared with those from the 16 marker set by means of a root mean square difference measure. Occlusions of medial markers fixed on the lower limb occurred when the legs were together and the pelvis markers disappeared primarily during the piked posture. Despite these occlusions, reconstruction was possible with 16, 11 and 7 markers. The time histories of joint angles were similar; the main differences were for the thigh mediolateral rotation and the knee flexion because the knee was close to full extension. When five markers were removed, the average angles difference was about 3 degrees . This difference increased to 9 degrees for the seven marker set. It is concluded that kinematics of sports movement can be reconstructed using a chain model and a global optimisation procedure for a reduced number of markers.
منابع مشابه
Estimation of spinal loads using a detailed finite element model of the L4-L5 lumbar segment derived by medical imaging kinematics; a feasibility study
Introduction: Low back pain is the most prevalent orthopedic disorder and the first main cause of poor working functionality in developed as wells as many developing countries. In Absence of noninvasive in vivo measurement approaches, biomechanical models are used to estimate mechanical loads on human joints during physical activities. To estimate joint loads via musculoskelet...
متن کاملBayesian Estimation of the Multiple Change Points in Gamma Process Using X-bar chart
The process personnel always seek the opportunity to improve the processes. One of the essential steps for process improvement is to quickly recognize the starting time or the change point of a process disturbance. Different from the traditional normally distributed assumption for a process, this study considers a process which follows a gamma process. In addition, we consider the possibility o...
متن کاملEffect of hip flexibility on optimal stalder performances on high bar.
In the optimisation of sports movements using computer simulation models, the joint actuators must be constrained in order to obtain realistic results. In models of a gymnast, the main constraint used in previous studies was maximum voluntary active joint torque. In the stalder, gymnasts reach their maximal hip flexion under the bar. The purpose of this study was to introduce a model of passive...
متن کاملEstimation of Kinetic Parameters of Coking Reaction Rate in Pyrolysis of Naphtha
The run length of cracking furnaces is limited by the formation of coke on the internal skin of the reactor tubes. The reaction mechanism of thermal cracking of hydrocarbons is generally accepted as free-radical chain reactions. On the basis of the plant output data and the insight in the mechanisms for coke formation in pyrolysis reactors, a kinetic model describing the coke formation has been...
متن کاملUsing System Dynamics to Model Rod Bar Supply Chain in Iranian Market
Steel market and particularly rod bar market play important roles in economy of countries. Economic systems are considered as complex systems which are sophisticated to be modeled mathematically. One way to model these systems is simulation and use of system dynamics. This paper models rod bar supply chain in Iran using system dynamics. Data of this research is gathered from first hand materi...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
- Journal of biomechanics
دوره 41 3 شماره
صفحات -
تاریخ انتشار 2008